How to Use Menu Functions35Menu Item Adjustments / Configurations (alternatives)SetupSystem MenuShipping Condition Resets all settings to the original condition (p. 47)System Update Downloads new software to this TV (p. 48)Software Licence Displays the software licence informationSystem Information Displays the system information of this TVOther SettingsGUIDE Plus+ SettingsUpdate Performs the update of the GUIDE Plus+ schedule and advertising information forthe GUIDE Plus+ system (only available in some countries) (p. 20)Postcode Sets your postcode to display advertisements in the GUIDE Plus+ system (onlyavailable in some countries) (p. 20)SystemInformationDisplays the system information of the GUIDE Plus+ system (only available insome countries)Power onPreferenceAutomatically selects the input when the TV is turned on [TV] / [AV]Set to [TV] to view picture from TV tuner. Set to [AV] to view input from theexternal equipment connected to the AV1 or HDMI1 terminal, e.g. set top box.The external equipment must be switched on and sending a control signal forautomatic switching at power on to occur.Auto StandbySets the duration of time that the TV will remain on when no operation isperformed [Off] / [2] / [4] (hours)Starting Timer Programming automatically does not affect this function.Automatic input switching with the connected equipment affects this functionand time-count will be reset.The notification message will appear 3 minutes before going into Standby mode.Power Save Reduces brightness of the picture to economise on power consumption[Off] / [On]Time Zone Adjusts the time dataThe time data will be corrected based on GMT.The settings in [Tuning Menu] are applicable only for the selected TV mode. The menu name varies depending on theTV mode. ([DVB-C Tuning Menu] / [DVB-T Tuning Menu] / [Analogue Tuning Menu])A different menu will be displayed in the mode of Media Player. (p. 50 - 57)Only available items can be selected.