Panasonic Viera TX-P42X50E Operating Instructions Manual

Also see for Viera TX-P42X50E: Operating instructions

Panasonic Viera TX-P42X50E Operating Instructions Manual Manual pdf 10 page image

Identifying ControlsQuick Start Guide5 6 7314210Indicator / Control panelUsing the On Screen Displays - Operation guideMany features available on this TV can be accessed via the On Screen Display menu. Operation guideOperation guide will help you to operate by using theremote control.Example: [Sound Menu]Sound MenuMode MusicOffOffOver 30cmBass 0011TrebleBalanceHeadphone VolumeSurroundAuto Gain ControlVolume CorrectionSpeaker Distance to Wall1/200Select EXIT Page upChangeRETURN Page downOperation guide How to use remote controlOpen the main menuMove the cursor / select the menu item (up anddown only) / adjust levels (left and right only) /select from a range of options (left and right only)Access the menu / store settings after adjustmentshave been made or options have been setReturn to the previous menuExit the menu system and return to the normalviewing screenAuto power standby functionThe TV will automatically go into Standby mode in the following conditions: No signal is received and no operation is performed for 30 minutes in Analogue TV mode. [Off Timer] is active in the Setup Menu. (p. 17) No operation is performed for the period selected in [Auto Standby] (p. 35).This function does not affect the recording of Timer Programming and Direct TV Recording.1 Function select[Volume] / [Contrast] / [Brightness] / [Colour] /[Sharpness] / [Tint] (NTSC signal) / [Bass] /[Treble] / [Balance] / [Auto Setup] (p. 36, 37)[Music] or [Speech] mode in the Sound Menu2 Channel Up / Down, Value change (when using theF button), Switching the TV on (press either buttonfor about 1 second when in Standby mode)3 Changes the input mode4 Mains power On / Off switchUse to switch the mains power.If you turned the TV off during Standby modeby the remote control last time, the TV will bein Standby mode when you turn the TV on withMains power On / Off switch.When pressing the control panel button (1 - 4), thecontrol panel guide appears on the left side of thescreen for 3 seconds to highlight the pressed button.5 Remote control signal receiverDo not place any objects between the TV remotecontrol signal receiver and remote control.6 C.A.T.S. (Contrast Automatic Tracking System)sensorSenses brightness to adjust picture quality when[Eco Mode] in the Picture Menu is set to [On].(p. 28)7 Power and Timer LEDRed: StandbyGreen: OnOrange: Timer Programming OnOrange (flash):Recording of Timer Programming or Direct TVRecording in progressRed with orange flash:Standby with Timer Programming On or DirectTV RecordingThe LED blinks when the TV receives a commandfrom the remote control.Rear side of the TV