Panasonic Viera TX-26LXD71F Operating Instructions Manual

Contents

Panasonic Viera TX-26LXD71F Operating Instructions Manual Manual pdf 18 page image

Advanced• HDMI FunctionsOffOffOffSetup Menu 2/2VIERA LinkSoftware LicenseOnBanner Display Timeout 3 secondsInput LabelsSystem UpdateSystem InformationTime Zone AutoCommon InterfaceGUIDEINPUTASPECT DIRECT TV RECVCR1 324 657 980TEXT STTL INDEX HOLDPROGRAMMEREC VCR DVDRETURNEXITMENUOKOPTIONMENU34 35Set to “On”(default is On)Select “Setup”Select “VIERA Link”213Display the menu∗Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.This TV supports “HDAVI Control 2” function.Connections to some Panasonic equipment (DVD Recorder DIGA, HD Video Camera, Player theatre,Amplifier, etc.) with HDMI cables allow you to interface them automatically.The equipment with “HDAVI Control” function enables the following operations:• Easy playback (p. 35)• Power on link (p. 35)• Power off link (p. 35)• Speaker control (p. 35)In addition, the equipment with “HDAVI Control 2” function enables the following operation:• Easy control only with VIERA remote control (p. 35)These features are limited to models incorporating Panasonic’s “HDAVI Control” and “VIERA Link”.VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industrystandard known as HDMI CEC (Consumer Electronics Control), is a unique function that we havedeveloped and added. As such, its operation with other manufacturers’ equipment that supports HDMICEC cannot be guaranteed.Refer to individual manuals for compatibility information. About applicable equipment, consult your localPanasonic dealer.VIERA Link “ ControlTM”∗4HDMI Functions■ HDMI cableThis function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized.It is recommended that you use Panasonic’s HDMI cable. Recommended part number:• RP-CDHG15 (1.5 m)• RP-CDHG30 (3.0 m)• RP-CDHG50 (5.0 m)Easyplayback Automatic Input switching-When the connected Panasonic equipment is operated, inputmode is switched automatically. When it is stopped operating, input mode is returned.Power onlinkWhen the connected Panasonic equipment starts playback or direct navigator /function menu for the equipment are activated, the TV is automatically turned on.(Only when TV is in Standby mode.)Power offlinkWhen TV is set to Standby mode, the connected Panasonic equipment is alsoautomatically set to Standby.• This function will work even if the TV enters standby mode automatically by Off Timerfunction or auto power standby function.■ PreparationsSetup the equipment to enable this function. Read the manuals of the equipment.About connections, see “External Equipment” (p. 37). Read the manuals of the equipment too.■ For the first time / When adding new equipment, reconnecting equipment or changing setupAfter connection turn the equipment on and then switch the TV on.Select the input mode to HDMI1 or HDMI2 (p. 14), and make sure that an image is displayedcorrectly.Main MenuVIERA LinkPictureSoundSetupsetaccessselectselect SpeakercontrolYou can control the theatre speaker with TV’s remote control.This function is available when Panasonic Amplifier or Player theatre is connected.• If you cannot access the menu, check thesettings and the equipment (p. 34).Display “VIERA Link Menu”■ TVTV speakers are active.■ Home CinemaAdjustment for equipment(automatically turned on if it is inStandby mode).Volume up / downMuteSelect “Speaker Selection”Set to “Home Cinema” or“TV”• The sound of TV speakers is mute.• When the equipment is turned off,TV speakers will be active.VIERA Link ControlSpeaker SelectionVIERA Link MenuHome CinemaRecorderselectsetEasycontrolonly withVIERAremotecontrolYou can control some functions of theconnected Panasonic equipment withthis TV remote control (point the remotecontrol at the TV’s signal receiver).• If you cannot access the menu, check thesettings and the equipment (p. 34).Access the menu of the equipmentDisplay “VIERA Link Menu”• Example:• About the operations for the equipment, read the manual of the equipment.DVD Recorder DIGA HD Video Camera Player theatreHDDFUNCTION MENUPlaybackRecordingDeleteCopyTo OthersALLDATE/TIME 2006.12. 1 10:468 / 8ListenStartWatchImport/RecordSetupMove the cursor / select themenuMove the cursor / access /adjustStore / Set / AccessRETURN Return to the previousmenuEXITExit the menuOPTION The same functions withthe OPTION button of theequipmentred green yellow blue Access when the key wordsare displayed on colour bar• Available VIERA remote control buttons:(depending on the connected equipment)Select theequipment youwant to access accessselectOperate the menu of the equipmentVIERA Link ControlSpeaker SelectionVIERA Link MenuHome CinemaRecorderSelect “VIERA Link Control”select