Panasonic Viera TH-P58V10A Operating Instructions Manual

Panasonic Viera TH-P58V10A Operating Instructions Manual Manual pdf 48 page image

48PC connectionA PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.NoteSome PC models cannot be connected to this TV.When using PC, set the colour display quality of PC to the highest position.For details of the applicable PC signals, see below.Max. display resolutionAspect 4:3 1,440 × 1,080 pixels16:9 1,920 × 1,080 pixelsD-sub 15-pin connector signalPin No. Signal Name Pin No. Signal Name Pin No. Signal NameR GND (Ground) NC (not connected)G GND (Ground) NC (not connected)B GND (Ground) HDNC (not connected) NC (not connected) VDGND (Ground) GND (Ground) NC (not connected)●●●●●●●Technical InformationInput signal that can be displayedCOMPONENT (Y, PB/CB, PR /CR ), HDMI∗ Mark: Applicable input signalSignal name COMPONENT HDMI525 (480) / 60i ∗ ∗525 (480) / 60p ∗ ∗625 (576) / 50i ∗ ∗625 (576) / 50p ∗ ∗750 (720) / 60p ∗ ∗750 (720) / 50p ∗ ∗1,125 (1,080) / 60i ∗ ∗1,125 (1,080) / 50i ∗ ∗1,125 (1,080) / 60p ∗1,125 (1,080) / 50p ∗1,125 (1,080) / 24p ∗PC (D-sub 15P)Signal name Horizontal frequency (kHz) Vertical frequency (Hz)640 × 400 @70 Hz 31.47 70.07640 × 480 @60 Hz 31.47 59.94640 × 480 @75 Hz 37.50 75.00800 × 600 @60 Hz 37.88 60.32800 × 600 @75 Hz 46.88 75.00800 × 600 @85 Hz 53.67 85.06852 × 480 @60 Hz 31.44 59.891,024 × 768 @60 Hz 48.36 60.001,024 × 768 @70 Hz 56.48 70.071,024 × 768 @75 Hz 60.02 75.031,024 × 768 @85 Hz 68.68 85.001,280 × 1,024 @60 Hz 63.98 60.021,280 × 768 @60 Hz 47.70 60.001,366 × 768 @60 Hz 48.39 60.04Macintosh13” (640 × 480) 35.00 66.67Macintosh16” (832 × 624) 49.73 74.55Macintosh21” (1,152 × 870) 68.68 75.06NoteSignals other than above may not be displayed properly.The above signals are reformatted for optimal viewing on your display.Applicable input signal for PC is basically compatible to VESA standard timing.PC signal is magnified or compressed for display, so that it may not be possible to show fine detail with sufficientclarity.●●●●