40Features available (Using VIERA Link Menu)Speaker control Speaker SelectionVIERA Link “ ControlTM”You can control the theatre speaker with this TV remote control by pointing at the TV's signalreceiver.If you cannot operate, check the settings and the equipment “VIERA Link features and connections” (p. 36)Access and control the speaker volume●PROGRAMMEINDEX HOLDTEXTTV AVRECOPTIONR G Y BPOWERPOWERINPUTPCMENU SURROUNDEXITASPECTRETURNF.P.RECALLPIPMUTEDisplay “VIERA Link Menu”Select “Speaker Selection”Direct TV RecVIERA Link MenuStartPause Live TV StartVIERA Link ControlSpeaker Selection Home CinemaRecorder selectSet to “Home Cinema” or “TV”setHome CinemaPlayer theatre, Blu-ray Disc theatre or Amplifier will be automatically turned onif it is in Standby mode and the sound is from theatre speakers connected tothe equipment.Volume up / down(Volume slide bar will be displayed whenadjusting the volume of the equipment. )Mute MUTEThe sound of TV speakers is mute.When the equipment is turned off, TV speakers will be active.TVTV speakers are active.●●●●NoteIf you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via anAmplifier, connect with HDMI cable and Optical digital audio cable (p. 36), andthen select “Home Cinema”.To enjoy the sound from the DIGA Recorder in multi-channel sound, connect anHDMI cable from the DIGA Recorder to the Amplifier (p. 36).Easy playback may be available by using the remote control for Player theatre,Blu-ray Disc theatre or Amplifier. Read the manual of the equipment.●●NoteThese functions may not work properly depending on the connected equipment.Image or sound may not be available for the first few seconds when input mode is switched.“HDAVI Control 4” is the newest standard (current as of December, 2008) for HDAVI Control compatibleequipment. This standard is compatible with conventional HDAVI equipment.To confirm this TV’s version of HDAVI Control “System Information” (p. 25)●●●●