VIERA Link Functions48[Speaker Selection] - Speaker controlYou can control the theatre speaker with this TV remote control by pointing at the TV’s signal receiver.● If you cannot operate, check the settings and the equipment“Summary of features”, “Connection”, “Preparations” (p. 44 - 45)1 Display [VIERA Link Menu]VIERALink2 Select [Speaker Selection]Direct TV Rec StartPause Live TV StartVIERA Link Control RecorderSpeaker Selection Home CinemaVIERA Link Menu select3 Set to [Home Cinema] or [TV]set[Home Cinema]Player theatre, Blu-ray Disc theatre or Amplifier will be automatically turned on if it is in Standby mode and thesound is from theatre speakers connected to the equipment.● Volume up / down VOL● Mute● The sound of TV speakers is mute.● When the equipment is turned off, TV speakers will be active.[TV]TV speakers are active.Multi-channel sound● If you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via an Amplifier, connect with HDMI cable andOptical digital audio cable (p. 44), and then select [Home Cinema]. If your Amplifier has “HDAVI Control 5” function,you can connect only with HDMI cable. In this case, connect your Amplifier to the TV’s HDMI2 terminal.To enjoy the sound from the DIGA Recorder in multi-channel sound, connect an HDMI cable from the DIGA Recorderto the Amplifier (p. 44).Note● These functions may not work properly depending on the connected equipment.● Image or sound may not be available for the first few seconds when the Input mode is switched.● Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplifier.Read the manual of the equipment.● “HDAVI Control 5” is the newest standard (current as of December, 2010) for HDAVI Control compatible equipment.This standard is compatible with conventional HDAVI equipment.● To confirm this TV’s version of HDAVI Control [System Information] (p. 29)TH-L32XM5Z.indb 48TH-L32XM5Z.indb 48 7/3/2012 6:35:23 PM7/3/2012 6:35:23 PM