42Network link• Edit the name of this TVSets your favorite name for thisTV.This namewill be used to display the nameofthis TV onthe screenofthe other Network compatibleequipment.CDSelect "VIERA network name"MenuNetworkhnk•VIER.&.netwotknameVIERAJ'lOLNA••mote controlEnableOUlAremoltlvOhllllteo!lltl)l Enablej Network remote control Enable-;::::-G)select§~®OK)//® Edit the name and press OKEntering characters (p. 21)Network cameras list• Switches DLNA remote control (Disable/Enable)Switches DLNA remote control "Disable" or "Enable"OLNA remote control Enable•Volumesetting in DMR operation (Disable/Enable)Sets volume setting in DMR operation• Available only when "Enable" is selectedin"DLNA remotecontrol"DtNAremotevolumecontrol Enable• Switches Network remote control (Disable/Enable)Switches remote control of network device such as asmartphone to "Disable" or "Enable".Network remote control EnableJselectBefore using a Network camera, you need to register the camera as shown below. You can also setDefault camera or Disconnect/Delete the registered cameras.CDPress "Network cameras list" anddisplay screen® Set Network camera setting..,)select..-------------!11I I.._____________il• For this operation, please refer to the operatingmanual for the Network camera.Software updateR,_+ Start camera search.G• Before you start to search for a camera, switch thecameratoregistration mode.• Search condition also dependson"Network settings"18+ Delete camera information .8._• Disconnect to camera."Disconnected" will be displayedin"Status".• Set to default use.Displayed "(Default)" next to camera name .(Available only when reconnecting)+ Connect to Camera. "Connect" will be displayedin"Status".CDSelect "Software update" ® Press OK to start the Software update screen..~-;;::::-G)select @Follow directions on the screenI~~ • Set "Clock" first. (p. 17),,s--+®oK