8AccessoriesAssembly screws (4 of each)A BXSS4+16FJK(32”)XSS4+16FNK(37”/42”)size (M4 × 16)XYN4+F12FJKsize (M4 × 12)Bracket (1) Base (1)ŶAssembling the pedestalFix securely with assembly screws A . (Total 4 screws)Tighten screws firmly.ABracketFrontBaseŶSet-upFix securely with assembly screws . (Total 4 screws)Tighten screws firmly.BBBFoam mat or thicksoft clothTC-L32U3/TC-L37U3 TC-L42U30WARNINGDo not disassemble or modify the pedestal.Otherwise the TV may fall over and become damaged, and personal injury may result.CautionDo not use any pedestal other than that provided with this TV.Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest PanasonicDealer immediately.During set-up, make sure that all screws are securely tightened.If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strongenough to support the TV, and it might fall over and become damaged, and personal injury may result.Attaching the pedestal to TVInstalling the remote’s batteriesOpenHookNote the correct polarity(+ or -).CloseCautionIncorrect installation may causebattery leakage and corrosion,resulting in damage to the remotecontrol.• Do not mix old and new batteries.• Do not mix different battery types (suchas alkaline and manganese batteries).• Do not use rechargeable (Ni-Cd)batteries.Do not burn or break batteries.