Panasonic Viera TC-L32B6X Operating Instructions Manual

Also see for Viera TC-L32B6X: Service manual

Panasonic Viera TC-L32B6X Operating Instructions Manual Manual pdf 1 page image

Standard accessories[] Check that you have the accessories anditems shown[] Remote Control [] PedestalN2QAYB000820 For 32" TV For 39" TV[] Power cord[] Batteries for the __Remote Control (2)• (AA) [] Assembly screws(4 of each)For 32" TV _._[]Operating _-'_ _Instructions For 39" TV_vThank you for purchasing this Panasonic product.Please read these instructions before operating your setand retain them for future reference. The images shownin this manual are for illustrative purposes only.Panasoni¢Model No.TC-L32B6X/TC-L32BGPTC-L39BGX/TC-L39BGPFor additional assistance, visit us at:(LATIN) www.panasonic-la.comI-llli::liTU TM2.0+Digital Out| DOLBYDIGITALH DA70D32221This product incorporates some kinds of open sourcesoftware. The software is distributed in the hope that itwill be useful, but WITHOUT ANY WARRANTY, withouteven the implied warranty of MERCHANTABILITY orFITNESS FOR A PARTICULAR PURPOSE. Please referto the detailed terms and conditions thereof shown in the"License" menu on this product.Panasonic does not guarantee operation and performanceof peripheral devices made by other manufacturers; andwe disclaim any liability or damage arising from operationand/or performance from usage of such other maker'speripheral devices.HDMI, the HDMI logo and High- Definition MultimediaInterface are trademarks or registered trademarks ofHDMI Licensing LLC in the United States and othercountries.Manufactured under license from Dolby Laboratories.Dolby and the double-D symbol are trademarks of DolbyLaboratories.Manufactured under license under U.S. Patent Nos:5,956,674; 5,974,380; 6,487,535 & other U.S. andworldwide patents issued & pending. DTS, the Symbol, &DTS and the Symbol together are registered trademarks& DTS 2.0+Digital Out is a trademark of DTS, Inc. Productincludes software. © DTS, Inc. All Rights Reserved.ntentsSafety Precautions .............................................. 2Note to CATV System Installer ............................ 2Secure Ventilation ............................................... 2Important Safety Instructions .............................. 2Attaching the pedestal to TV ............................... 3Connection Panels .............................................. 3AV cable connection ........................................... 4Audio connection ................................................ 4Audio ARC connection ........................................ 4Using Controls on the TV .................................... 5Indicators on the TV ............................................ 5Power cord connection ....................................... 5Installing the remote's batteries .......................... 5Remote control .................................................... 6First Time Setup .................................................. 7Watching TV ........................................................ 7Listen with SAP (Secondary Audio Programming)...7Closed Caption (CC) .......................................... 7Displaying information ........................................ 7Display the "Options menu". ............................... 8Call up a Favorite channel .................................. 8Password setting/entering .................................. 8Set the "Sleep timer". .......................................... 8How to Use Menu Functions ............................... 8Using Media player ............................................ 11Supported file format in Media Player ................ 13Specifications .................................................... 14Notes ................................................................. 14Customer Service Directory .................................... 15CAUTIONWARNING: To reduce the risk of electric shock, do not remove cover or back.No user-serviceable parts inside. Refer servicing to qualified service personnel.The lightningflash with arrowhead within a triangle isintended to tell the user that parts inside the productare a risk of electric shock to persons.,_ The exclamation point within a triangleis intended to tell the user that important operatingand servicing instructions are in the papers with theappliance.This reminder is provided to direct the CATV system installer'sattention to Article 820-40 of the NEC that provides guidelines forproper grounding and, in particular, specifies that the cable groundshall be connected to the grounding system of the building, as close tothe point of cable entry as practical.Slots and openings in the cabinet and the backor bottom are providedforventilation,and to ensure reliableoperation of the LCD TV and to protect itfrom overheating.These openings must not beblocked or covered.Thereshouldbe at least 10cm of space around the TV. The openings shouldnever be blockedby placingthe LCD TV on a bed, sofa, rug or othersimilarsurface.This LCD TV should not be placedin a built-ininstallationsuch asa bookcase unless proper ventilation is provided,1) Read these instructions,2) Keep these instructions,3) Heed all warnings.4) Follow all instructions,5) Do not use this apparatus near water,6) Clean only with dry cloth,7) Do not block any ventilation openings, Install in accordance with themanufacturer's instructions,8) Do not install near any heat sources such as radiators, heatregisters, stoves or other apparatus (including amplifiers) thatproduce heat,9) Do not defeat the safety purpose of the polarized or grounding-typeplug, A polarized ptug has two blades with one wider than the other,Agrounding type plug has two blades and a third grounding prong,The wide blade or the third prong are provided for your safety, If theprovided plug does not fit intoyour outlet, consult an electrician forreplacement of the obsolete outlet,10) Protect the power cord from being walked on or pinched particularlyat plugs, convenience receptacles, and the point where they exitfrom the apparatus,11) Only use attachments / accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket ortable specified by the manufacturer, or sold with the _II_,_IILapparatus, When a cart is used, use caution when _ _moving the cart / apparatus combination to avoid injuryfrom tip-over.18) Unplug this apparatus during lightning storms or when unused forlong periods of time,14) Refer all servicing to qualified service personnel, Sen/icing isrequired when the apparatus has been damaged in any way, suchas power-supply cord or plug is damaged, liquid has been spilledor objects have fallen into the apparatus, the apparatus has beenexposed to rain or moisture, does not operate normally, or hasbeen dropped,15) Operate onty from the type of power source indicated on themarking label, If you are not sure of the type of power supplied toyour home consult your television dealer or local power company,16) Follow all warnings and instructions marked on the LCD TV,17) Never push objects of any kind into this LCD TV through cabinetslots as they may touch dangerous voltage points or short outparts that could result in a fire or electric shock. Never spill liquidof any kind on the LCD TV.18) If an outside antenna is connected to the television equipment,be sure the antenna system is grounded so as to provide someprotection against voltage surges and built up static charges.In the U.S. Section 810-21 of the National Electrical Codeprovides information with respect to proper grounding of the mastand supporting structure, grounding of the lead-in wire to anantenna discharge unit, size of grounding conductors, location ofantenna discharge unit, connection to grounding electrodes, andrequirements for the grounding electrode.EXAMPLE OF ANTENNAGROUNDINGAS PER _ T_-(NEC) NATIONALELECTRICAL .... ANTENNACODE / , LEADqN WIREGROUNDCLAMPANTENNA_ I DISCHARGEUNIT_(NEC SECTION810-20)GROUNDINGCONDUCTORS(NECSECTION810-21)GROUND CLAMPSPOWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250, PART H)19) An outside antenna system shouldnot be located in the vicinityofoverhead power lines, other electric light,power circuits,or where itcan fallinto such power lines or circuits.When installingan outsideantennasystem, extreme care shouldbe takento keep fromtouchingsuch power lines or circuitsas contact with them mightbefatal.20) Unplug this LCD TV from the wall outlet and refer sen/icing toqualified service personnel under the following conditions:a. When the power cord or plug is damaged or frayed.b. If liquid has been spilled into the LCD TV.c. If the LCD TV has been exposed to rain or water.d. If the LCD TV does not operate normally by following theoperating instructions.Adjust only those controls that are covered by the operatinginstructions as improper adjustment d other controls mayresult in damage and will often require extensive work bya qualified technician to restorethe LCD TV to normaloperation.e. If the LCD TV has been dropped or the cabinet has beendamaged.f. When the LCD TV exhibits a distinct change in performance- this indicates a need for service.21) When replacement parts are required, be sure the servicetechnician uses replacement parts specified by the manufacturerthat have the same characteristics as the original parts.Unauthorized substitutions may result in fire, electric shock, orother hazards.22) WARNING: TO REDUCE THE RISK OF FIREOR ELECTRICSHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN,MOISTURE, DRIPPING OR SPLASHING. DO NOT PLACELIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS,ETC.)ABOVE THE SET (INCLUDING ON SHELVES ABOVE,ETC.).23) WARNING: SMALL PARTS CAN PRESENT CHOKINGHAZARD IF ACCIDENTALLY SWALLOWED. KEEP SMALLPARTS AWAY FROM YOUNG CHILDREN. DISCARDUNNEEDED SMALL PARTS AND OTHER OBJECTS,INCLUDING PACKAGING MATERIALS AND PLASTICBAGS/SHEETS TO PREVENT THEM FROM BEING PLAYEDWITH BYYOUNG CHILDREN, CREATING THEPOTENTIAL RISK OF SUFFOCATION.24) WARNING: f'_.To prevent the spread of fire, keep !, ]_ Bcandles or other open flames away_from this product at all times.25) WARNING: Awarning that batteries (battery packor batteries installed) shall not be exposed toexcessive heat such as sunshine, fire or the like.226) CAUTION: The Power switch on this unit will not completelyshut off all power from AC outlet, Since the power cord serves asthe main disconnect device for the unit, you will need to unplug itfrom the AC outlet to shut down all power, Therefore, make surethe unit has been installed so that the power cord can be easilyunplugged from AC outlet in case of an accident, To avoid firehazard, the power cord should also be unplugged from the ACoutlet when left unused for a long period of time (for example,when on vacation),27) CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USETHIS PLUG WITH A RECEPTACLE OR OTHER OUTLETUNLESS THE BLADES CAN BE FULLY INSERTED TOPREVENT BLADE EXPOSURE.28) CAUTION: USE WITH OTHER STAND MAY RESULT ININSTABILITY POSSIBLY CAUSING INJURY.29) CAUTION: DANGER OF EXPLOSION IF BATTERY ISINCORRECTLY REPLACED. REPLACE ONLYWITH THESAME OR EQUIVALENT TYPE.[] Set=upFix securely with assembly screws @. (Total 4 screws)Tighten screws firmly.® Tighten assembly screws (_ (total 4 screws) loosely at first, then tighten them firmly to fix securely.32" TV Rear sideNeck jBaseFoam _t or thicksoft cloth39" TV Rear sideProtrusion of Neck (Bottom)Hole for pedestalBase Bracket[Work ona flat surfaceI installationSecure the base as shown below to prevent the TVfrom failing over.• The place where the base is secured should be thickenough and made of hard material.Commercially available screw(not supplied)Diameter: 3 mmLength: 30 - 35 mm (32")25 - 30 mm (39"){ WARNING )Do not disassemble or modify the pedestal.® Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use any pedestal other than that provided with this TV.® Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.® If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.During set-up, make sure that all screws are securely tightened.® If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough tosupport the TV, and it might fall over and become damaged, and personal injury may result.[Optional accessoriesWall-hanging bracket (net supplied)Use the screws that are threaded into the stand-mounting inserts on the back of your LCD TV to secure it to a Wall Mounting kit.It is safe to use long screws for this product.When using long screws, the two bottom screws may loosen, but the top two will remain tightly in place to secure the mounted TV.Wall Mounting Inserts(V_ew from the side)3L3_J 200 x 1oo mm IDepthof...... _ 200 X 200 mmi,[ _ 39" Minimum: 0.47 " (12.0 ram)39" Maximum: 0.87 " (22.0 ram) Mounting screws_l,, M_ measurements:N4 x 4 (only for 32")M6 x 4 (only for 39")Please contact your nearest Panasonic dealer to purchase the recommended wall-hanging bracket. For additional details, please refer to thewall-hanging bracket installation manual.WARNING® CustomerassumesliabilityifmountingtheunitthemseivesorifaPanaaoniebracketisnotused.Anydamageresultingfromnothavinga _o_asionalinstallermountyourunitwillvoidyourwarranty.® Alwaysbe suretoaska qualifiedtechniciantoperformanynecessaxyset-.up.Inco_ectfittingmay causeequipmenttofall,resulfingininju|yandproductdamage.® Donot mountthe unit directS/belowceiling lights (suchas spotlights,floodlights or halogen lights)which typically give off high heat. Doingso may warpor damageplasticcabinet parts.® Takecarewhen fixingwall bracke4sto the wall Always ensurethat thereare noelectricalcablesor pipas inthe wall beforehanging bracket.® When using anangled-typewall hangingbracket, pleaseeneurethat thereis sufficientspace for the eounecting cablesso thatthey do not pressagainstthe wall when _ "IVistilted forward.® Forsafety reasons,removeunits no longerbeingused fi'omtheirwall.mounted locations.121 USB port2 DIGITAL AUDIO OUT3 ANTENNA / CABLE IN4 Video IN / COMPONENT IN5 HDMI 1 - 2Back of the TVNote:® When using a Cable box, external equipment andvideo cables shown in this manual are not suppliedwith the TV._ For additional assistance, visit us at:www.panasonic.com.mxBest _A_To use HDMI terminalsGood.iOP"5Q=HDMI_" AV OUTHDM -DV _'Conversion cable............ " _ DVI OUT;!_R AUDIO OUT_ To use COMPONENT input terminals! mI II blueL ...... red"een,_/P_ COMPONENTVIDEO OUTblueredAUDIOOUTred°'_ AV Equipmente.g. Blu-ray DiscplayerAV Equipmente.g. Blu-ray DiscplayerAV Equipmente,g. Blu-ray DiscplayerredBasic @ To use VIDEO input terminals(NotHD) _ - '"__0_ COMPOS TE AV Equipmentyellow "eiiow VIDEO OUT :o_ol', , S,e.9.DVDRecorder_,_ _ white / wl_ite AUDIO [ or, red _ _ _ ....i _-: R OUT............ e.g. VCRyellow® Listen to your TV through your stereoStereo SystemOptical cablee.g. Amplifier® Listen to your TV through your HDMI AMPHDMI cableAmplifier withSpeaker system512341 Changes the input mode®Chooses menu and submenu entries, and returns (Press andhold down for MENU function)2 Channel up/down3 Volume up/down4 Power button1 Remote control signalreceiver®Remote control sensorrange is about 23 feet (7meters) in front of the TV set2 Power LED®ON: red®OFF: no light1 2Note:_, The -IV consumes a smatl amount of electric energy evenwhen turned off._* Do not place any objects between the TV remote controlsensor and remote control.Insert the power cordPull openHook(+ or-).Caution:¢ Incorrect installation may cause battery leakage andcorrosion, resulting in damage to the remote control.,_Do not mix old and new batteries.,_Do not mix different battery types (such as alkaline andmanganese batteries)._ Do not use rechargeable (Ni-Cd) batteries.® Do not burn or break batteries.123456712131415161718192011 211 POWER - Switches TV On or Off.2 MEDIA PLAYER - Viewing media contents from a USB.3 MENU - Press to display the menu screen.4 INFO - Displays TV status information as well asprogram details.5 SLEEP -Accesses the sleep timer.6 OPTION = Displays Options menu for special functions(when available)7 COLOR KEY - Red/Green/Yellow/Blue key for various function.8 Volume Up / Down (VOL+ / - ) - Press to decrease orincrease the audio volume.9 MUTE - Turns off/on the sound.10 Channel Numbers - Directly tune channels.11 = - Use for digital channels.12 CC =Switches the Closed Caption mode On or Off.13 SAP - Select the Audio mode for watching TV. (SAP :Secondary Audio Programming).14 INPUT - Select input sources "ANT/Cable in", "HDMI 1","HDMI 2", "Component", "Video" by pressing INPUT buttonon Remote Control.15 EXIT - Exit from the menu screen.16 FAVORITE - Accesses the favorite channels.17 OK / _,'_ 4 1_- Selects/OK/Change.18 RETURN - Press to return to previous menu.19 Channel Up / Down (CH ^ / v). Press to switch to thetast or next channel.20 FORMAT - To cycle through the aspect ratio modes.21 LAST - Switches to previously viewed channel or input.First time setup screen is only displayed automatically afterthe power cord is inserted into a wall outlet and the TV isturned on for the first time.[] Turn the TV On with the "POWER" button[] Selectyour languageEnglish/EspaSol/Frangais[] Set viewing mode1 Select your viewing mode (Be sure to select"Home use")2 Please confirm your selection (Home use) before pressingthe OK button.® If you select" Store demonstration" by mistake in "Set viewingmode", confirmation screen will be displayed.• Select "No" and return to previous screen "Set viewingmode".• If you select "Yes", screen enters the storedemonstration mode.® To display the "Set viewing mode" screen again as shownabove and select "Home use", perform "Reset to defaults"in the "Setup" menu.• If you perform "Reset to defaults", please do not unplugthe AC Cord while the TV is being reset.[] ANT/Cable setup (Auto channel setup)1 Select signal type "Over-the-Air" or "Cable service".2 Select "Auto program" and start scanning, the channelscanning starts.[] Finished First time setup.Congratulations! Setup is complete.I To watch TV via a Cable box, Satellite receiver, or any other Isource (DVD, DVR, gaming device, etc.), press the INPUTIbutton and select the appropriate input.Note:_* If you turn the TV off before completing "First time setup", theinitial setup wilt not launch again the next time you power onthe unit._* You can repeat "First time setup" by selecting "Reset todefaults" in the "Setup" menu.® After "First time setup", you can also change "Language"and "ANT/Cable setting" from the "Setup" and "TV" menusrespectively._* About broadcasting systemsAnalog (NTSC): Conventional broadcastingDigital (ATSC): Digital TV Standards include digital high-definition television (HDTV), standard-definition television(SDTV), data broadcasting, multi-channel surround soundaudio and interactive television.[] Turn power on_ Select correct input.[] Select a channel numberTo directly enter the digital channel numberAtso press CH ^ / CH v buttons on Side Controls or CH ^ /CH v buttons on Remote Controls to select programs.® Press CH ^ button to select next channel.® Press CH v button to select previous channel.For Cable/Satellite box connection-Use your connected box's remote control.Note:_* Reselect "Cable" or "Antenna" in "ANT in" of "TV" settings menuto switch the signal reception between cable -IV and antenna._* The channel number and volume level remain the same evenafter the TV is turned off.[] Select the Audio mode for watching TVDigital modePress [SAP] to select next Audio track (if available) whenreceiving a digital channel.Analog modePress [SAP] to select the desired Audio mode.® Each press of [SAP] will change the Audio mode.("Stereo" / "SAP" / "Mono")_* The selected mode is only set for the program you arewatching at the moment._* SAP is not available when watching TV with a Cable orSatellite box connected via HDMI._* Contact your Cable or Satellite operator for instructions onenabling SAP with their box.[] Press [CC] to select the CC11CC21C031CC4, receiving mode and CC setting inmenu.® The selected mode is only set for the program you arewatching at the moment.® Closed Caption is not available when watching TV with aCable or Satellite box connected via HDMI.® Contact your Cable or Satellite operator for instructions onenabling CC with their box.® The CC service is depend on the input signal.[] Displays or hides information. Shows thechannel banner when watching programsvia the Antenna/Cable input.Channel P_og_am P_og_am duration SAP indicationInput Rating Signalsignal level channel Caption resolutionVisually impaired •Hearing impaired

/ 2

Related manuals for Panasonic Viera TC-L32B6X