Panasonic Viera TC-60PS34 Owner's Manual

Also see for Viera TC-60PS34: Manual de usuario Owner's manual

Panasonic Viera TC-60PS34 Owner's Manual Manual pdf 36 page image

36Wireless network (Wireless network setting)■Sets / Changes wireless network settingPress “Wireless network” and display setting screenFollow the directions on screen to complete the settingWireless networkWPS (Wi-Fi Protected Setup using push button)Please choose connection method:WPS (Wi-Fi Protected Setup using PIN number)Search for wireless networksManual settingsselectOK* Wi-Fi Protected Setup is an easy setting of the Wi-FiAlliance’s certification● For more details on setting of an Access point, pleaserefer to operating manual for the Access point.Search for Wireless networks:Select an access point from the ones searched forautomatically, and configure the settings as instructedon the screen.WPS (Wi-Fi Protected Setup* using push button):You can connect the Access point to press thebuttons.WPS (Wi-Fi Protected Setup using PIN number):Set the PIN code that is displayed on the TV on theAccess point.Manual settings:Manually set SSID, Security type, and Encryption typeto match the settings of the Access point to which toconnect.● When connecting by 11n (5 GHz), select “AES” as theEncryption type for the wireless LAN.IP address/DNS settingsSelect “IP/DNS setting mode” and set to“Automatic”(When IP/DNS automatic acquisition in DHCP can beused)Menu IP address/DNS settingsIP setting modeIP address 192.168.0.5Subnet mask 255.255.255.0Default gateway 192.168.0.254DNS setting mode AutomaticDNS 192.168.0.20AutomaticThe acquired address is displayed.selectOKEach IP address is acquired automaticallyIf you are using a broadband router, IP automaticacquisition in DHCP can be used under normalcircumstances. If you are not sure, check with the personwho installed the equipment, or check the instructions foreach device.■Manual settingSelect “IP/DNS setting mode” and set to “Manual”Select the item and press OKCheck the specifications of the broadband router andenter each IP address.Or Enter each IP address as was specified by theproviderIP address OK10 I0 . 0 . 0 . 0Proxy settingSet only if specified by the provider. It is not required for normal household use.Select “Proxy setting”Menu IP address/DNS settingsIP setting modeIP address 192.168.0.5Subnet mask 255.255.255.0Default gateway 192.168.0.254DNS setting mode AutomaticDNS 192.168.0.20Proxy settingAutomaticselectOKSelect item and press OKselectOKMenu Proxy settingProxy address0Proxy portEnter address or port number and press OK● Entering characters (p. 19)■Proxy addressThis is the address of the relay server that is connectedto the target server instead of the browser and sendsdata to the browser. Setting is only required if specifiedby the provider.■Proxy portThis number is specified by the provider together with theProxy address.