Panasonic Viera TC-50PS24 Operating Instructions Manual

Also see for Viera TC-50PS24: Manual de instrucciones Operating instructions Service manual Operating instructions

Contents

Panasonic Viera TC-50PS24 Operating Instructions Manual Manual pdf 4 page image

6 7Accessories/Optional AccessoryAccessoriesRemote ControlTransmitterN2QAYB000485Batteries for theRemote ControlTransmitter (2)AA BatteryAC cordPedestalTBLX0135Product Registration Card (U.S.A.)Operating Instructions (Book)VIERA Concierge and Quick start guideInstalling the remote’s batteriesOpenHookNote the correct polarity(+ or -).CloseCautionIncorrect installation may causebattery leakage and corrosion,resulting in damage to the remotecontrol.• Do not mix old and new batteries.• Do not mix different battery types (suchas alkaline and manganese batteries).• Do not use rechargeable (Ni-Cd)batteries.Do not burn or break batteries.Optional Accessory Please contact your nearest Panasonic dealer to purchase the recommendedwall-hanging bracket. For additional details, please refer to the wall-hangingbracket installation manual.Wall-hanging bracket(angle)TY-WK4P1RWa: 15.7” (400 mm)b: 11.8” (300 mm)Rear of the TVHoles for wall-hangingbracket installationScrew for fixing the TV onto the wall-hanging bracket(not supplied with the TV)Depth of screw:minimum 0.59” (15.0 mm),maximum 1.18” (30.0 mm)(View from the side)a bWarningIn order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licencedcontractor to secure the wall-hanging brackets.Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps toprevent the TV from tipping over.Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in thewall before hanging bracket.When using the angled-type wall hanging bracket, please ensure that there is sufficient space for the connectingcables not to press against the wall when the TV is tilted forward.For safety reasons, remove units no longer being used from their wall-mounted locations.How to assemble (p. 7)AccessoriesCheck you have all the items shown.M8AccessoriesAssembly screws(4 of each)AXYN5+F18FNM5 × 18 (Silver)BTHEL080NM5 × 30 (Black)Poles (2)L RL or R is printed at thebottom of the poles.Base (1)Attaching the pedestal to TV■Assembling the pedestalFix securely with assembly screws A . (Total 4 screws)Tighten screws firmly.ALRPoleFrontPoleBase■Set-upCarry out work on a horizontal and level surface.Tighten screws firmly.BFix securely with assemblyscrews B . (Total 4 screws)Rear sideArrowmarkPoleHole for pedestalinstallationPoleBaseBottom viewWarningDo not disassemble or modify the pedestal.Otherwise the TV may fall over and become damaged, and personal injury may result.CautionDo not use any other TV and displays.Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest PanasonicDealer immediately.During set-up, make sure that all screws are securely tightened.If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strongenough to support the TV, and it might fall over and become damaged, and personal injury may result.Operating Instructions (CD-ROM)