Panasonic VL-GM001 Installation And Operation Manual

Contents

Panasonic VL-GM001 Installation And Operation Manual Manual pdf 9 page image

9Power cable/wire type and distance• Power cable (between the sub monitor station and the AC adaptor):Type: ø1.2 Fire alarm cable 16 AWGDistance: Maximum 30 m (about 98 feet)• Wire (between the monitor station and the last sub monitor station):Type: General cable CAT-3 24 AWGDistance: Maximum 100 m (about 328 feet)ChimeSub Monitor stationVL-GM001AH11H12H21H22K1K2120 V ACAC adaptorConnect to terminalsH21 and H22 of thesub monitor station.NOTE:• This chime wiring schematic diagram is only an example.Refer to the wiring instruction provided with your chime for detail.• Refer to the technical data on page 18 when connecting to a chime.• All connections are non polar.Connect to terminalsH11 and H12 of themonitor station.Introduction and InstallationWiring schematic diagramAll monitor stations and sub monitor stations should be connected by daisy chainwiring method.The connection of 2nd sub monitor station (the last end terminal) and monitor stationis NOT required.