Panasonic VIERA TC-P50G25X Operating Instructions Manual

Panasonic VIERA TC-P50G25X Operating Instructions Manual Manual pdf 5 page image

8 9Quick StartGuide Accessories/Optional AccessoryAccessoriesAssembly screwsAM5 × 18 (Silver) (3)BM5 × 30 (Black) (4)Pole (1)Base (1)Accessories/Optional AccessoryAccessoriesRemote ControlTransmitterN2QAYB000486Batteries for the RemoteControl Transmitter (2)AA BatteryAC cordPedestalTBLX0147Operating InstructionsWarranty Card (Mexico)Installing the remote’s batteriesPull openHook Note the correctpolarity (+ or -).Close CautionIncorrect installation may cause batteryleakage and corrosion, resulting indamage to the remote control.• Do not mix old and new batteries.• Do not mix different battery types(such as alkaline and manganesebatteries).• Do not use rechargeable (Ni-Cd)batteries.Do not burn or break batteries.AccessoriesCheck you have all the items shown.Optional Accessory Please contact your nearest Panasonic dealer to purchase the recommendedwall-hanging bracket. For additional details, please refer to the wall-hangingbracket installation manual.Wall-hanging bracket(angle)TY-WK4P1RWa: 15.7” (400 mm)b: 11.8” (300 mm)Rear of the TVHoles for wall-hangingbracket installationScrew for fixing the TV onto the wall-hanging bracket(not supplied with the TV)Depth of screw:minimum 0.59” (15.0 mm),maximum 1.18” (30.0 mm)(View from the side)a bM8WarningIn order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensedcontractor to secure the wall-hanging brackets.Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps toprevent the TV from tipping over.Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in thewall before hanging bracket.When using the angled-type wall hanging bracket, please ensure that there is sufficient space for the connectingcables not to press against the wall when the TV is tilted forward.For safety reasons, remove units no longer being used from their wall-mounted locations.How to assemble (p. 9)Attaching / Removing the pedestal■Assembling the pedestalFix securely with assembly screws A .(Total 3 screws)Tighten screws firmly.AFrontPoleBase(3 screws)■Set-upCarry out work on a horizontal and level surface.Tighten screws firmly.BFix securely with assemblyscrews B . (Total 4 screws)Rear sideArrowmarkPoleHole for pedestalinstallationPoleBaseBottom viewRemoving the pedestal from the TVBe sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.Remove the assembly screws B from the TV.Pull out the TV from the pedestal.Remove the assembly screws A from the pole.WarningDo not disassemble or modify the pedestal.Otherwise the TV may fall over and become damaged, and personal injury may result.CautionDo not use any other TV and displays.Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest PanasonicDealer immediately.During set-up, make sure that all screws are securely tightened.If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strongenough to support the TV, and it might fall over and become damaged, and personal injury may result.When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (see above)Otherwise the TV and/or pedestal may fall over and become damaged, and personal injury may result.