Panasonic Toughbook CF-T5MWETABM Reference Manual

Also see for CF-T5 Series: Operating instructions Supplementary guide Operating instructions Operating instructions Supplementary instructions

Panasonic Toughbook CF-T5MWETABM Reference Manual Manual pdf 51 page image

51External Displayz When the application running is not shown on the display.When the application is in the external display or after the application is closed in the external display, there are timesthe application will not be shown in the display when executed the next time if the position of the extended display ischanged or the Extended Desktop is closed.When there is no display after the position of the extended display is changed:The application running is displayed at the position of the extended display before the change. Return the position ofthe extended display to the condition before the change. Move the application to the internal LCD, and then correct theposition of the extended display.When there is no display when the Extended Desktop is disabled:The application running is being displayed in the external display. Set the Extended Desktop again, move the applica-tion from the external display to the internal LCD and then disable the Extended Desktop.z When the display domain for the Extended Desktop is changed, the wallpaper and icons may become displaced.z When an animated pointer is used for the mouse pointer.An error may occur when resuming from the standby or hibernation. In such cases, change the mouse pointer to thestandard pointer with the following procedure:A Click [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].B Click [Pointers].C Click [None] in [Scheme], then click [OK].