Panasonic Toughbook CF-18BHKZXDM Service Manual

Also see for Toughbook CF-18 Series: Precautions for Installing Precautions for Installing Operating instructions Supplementary instructions Supplementary instructions

Contents

Panasonic Toughbook CF-18BHKZXDM Service Manual Manual pdf 29 page image

12.13. Removing Antenna Cover, TabletLatch Cover and LCD Rear CaseFigure 191. Remove the sixteen Screws. 2. Remove Antenna Cover and Tablet Latch Cover.3. Remove the two Screws. 4. Remove the eleven Screws. 5. Remove the LCD Rear Case.Screw: DXQT26+D5FZL: DXYN3+J10FNL: DXYN2+J6FNL12.14. Removing the LCD HingeFigure 201. Remove the two Screws. 2. Remove the Cable Holder Plate and LCD Hinge.3. Remove the Cable Holder.4. Remove the Cable Holder sheet.Screw: DXYN3+J8FNLInverter CaseConnector (CN2)Connector (CN1)Inverter PCBTS PS2 PCBConnector (CN901)Connector (CN900)LCD Back Damper12.15. Removing Inverter PCBFigure 211. Disconnect the two Cables from two Connectors (CN1, CN2).2. Remove the Inverter Case and Inverter PCB.3. Remove the two Screws. 4. Remove the LCD Rear Damper.Screw: DXHM0042ZA12.16. Removing GPRS Antenna PCB,LAN1-BT PCB, LAN2-BT PCB andPen HolderFigure 221. Remove the two Screws. 2. Remove the GPRS Antenna PCB.3. Remove the two Screws. 4. Remove the LAN1-BT Antenna PCB.5. Remove the two Screws. 6. Remove the LAN2 Antenna PCB.7. Remove the Pen.8. Remove the two Screws. 9. Remove the Pen Holder.Screw: DFHE5025XA: DFHE5025YALCD CableHolderSheetCableHolderCableHolderCableHolderPlateCable HolderPlateCableHolderPlateLCDHingeAntenna CoverTablet Latch CoverLCD Rear CaseAntenna Cover Pen HolderLAN1-BTAntenna PCBLAN2-BTAntenna PCBGPRSAntenna PCBPen27