Panasonic Toughbook CF-18BHKZXDM Service Manual

Also see for Toughbook CF-18 Series: Precautions for Installing Precautions for Installing Operating instructions Supplementary instructions Supplementary instructions

Contents

Panasonic Toughbook CF-18BHKZXDM Service Manual Manual pdf 27 page image

12.6. Removing the Audio PCBFigure 101. Remove the two Screws. 2. Disconnect the two Cables from two Connectors (CN701,CN702).3. Remove the Audio PCB.Screw: DXSB2+5FZL12.7. Removing the Wireless Module,Port PCB and Modem PCBFigure 111. Disconnect the two Antenna Cables from two Connectors(J5, J6).2. Remove the Wireless Module.3. Remove the three Screws. 4. Remove the Port PCB.5. Remove the Screw. 6. Remove the Modem PCB.7. Remove the two Screws. 8. Remove the BAT CON angle.Screw: DXSB2+5FZL: XSB2+4FNL: DXSB2+5FZL Bat Con AngleConnector (J5)Connector (J6)ModemPCB Port PCBWireless Module12.8. Removing Main PCBFigure 121. Disconnect the eight Cables from eight Connectors (CN3,CN9, CN12, CN14, CN23, CN30, CN35, CN36).2. Remove the Screw. 3. Remove the two Screws. 4. Remove the four Screws. 5. Remove the Main PCB.6. Disconnect the two Cables from two Connectors (CN8,CN17).7. Remove the PCMCIA Unit.Screw: DXSB2+5FZL: DXYN2+J12FNL: DXYN2+J18FNL12.9. Removing PAD PCB and I/O PCBFigure 131. Disconnect the Cable from Connector (CN801).2. Remove the three Screws. 3. Remove the PAD PCB.4. Remove the four Screws.
5. Remove the two Screws. 6. Remove the I/O PCB.Screw: DFHE5025XA
: DFHE5058ZA: DXSB2+5FZLConnector (CN702)Connector (CN701)Audio PCBHDD Guid PlateConnector (CN36)Connector (CN35)Connector (CN30)PCMCIA Unit to Connector (CN17)Connector (CN3)Connector (CN17)Connector (CN8)Connector (CN9)Connector (CN14)Connector (CN12)LAN CableMain PCBto Connector (CN8)Connector(CN23)
I/O PCBPAD PCBConnector(CN801)25