Panasonic TX-26LX60A Operating Instructions Manual

Also see for TX-26LX60A: Service manual Operating instructions Service manual

Contents

Panasonic TX-26LX60A Operating Instructions Manual Manual pdf 17 page image

AdvancedSTR F / TV/AV17• Editing and Setting ChannelsteOKSelect the programme numberand search through the channelAllows you to change the sound system used for a programme channel.(4.5MHz / 5.5MHz / 6.0MHz / 6.5MHz)Select the channel you want to adjust Set this function OKLets you select the correct transmission standard for the transmission signal being received. (p. 15)(Auto / PAL / SECAM / NTSC 4.43 / NTSC 3.58)Select the channel you want to adjust Set this function OK• Normally, select "Auto"For the small adjustments to the tuning of an individual channel (useful for example when weather conditions areaffecting reception quality of a programme)Select the channel you want to adjust Set this function OK• To cancel Fine tuning, tune again by Manual tuningFor skipping the programme numbers on which no TV stations are tunedSelect the programme numbers you want to skip Set "Skip" to "On" OKTo skip another channel, select the channel number via channel number buttons (if selecting two digits channel,you must first press the -/-- key then the channel digits).• If you intend to change the skip settings for a number of channels, write the channels’ numbers on a piece ofpaper before you begin.Manual tuning10Return ExitSearch down/upStore Programme down/upStoresearchProgrammenumberChannelRepeatandNote• If a VCR isconnected withonly the RFcable, selectprogrammenumber "0".• The programmenumber blinks.To freely change settings after Auto setupF (Press until "Tuning mode" appears)or / (Access Tuning menu)F (Press until "Manual tuning" is reached)or / (Access Manual tuning)TV/AV (Programme, Channel (select), Sound system)or / (Change programme or start searchingchannels)STR (Store)- (Repeat)For Manual tuning, using the buttons on the unit("Tuning mode" on p. 7)■ To return to TVF4. 5MHz10Manual tuning- , + : SearchTV / AV : Move cursorSTR : To storeF : To exitSTR F - / + / TV / AVProgramme number(Blinks)ChannelSound system(Blinks)selectprogrammeWhen the desiredchannel is found,press OK tostore.