Panasonic TX-24MS480B Operating Instructions Manual

Panasonic TX-24MS480B Operating Instructions Manual Manual pdf 19 page image

English - 18 -Device PreferencesAbout: Check for system updates, change the devicename, restart the TV and display system informationsuch as network addresses, serial numbers, versionsetc. You can also display legal information, manageadvertisings, display your advertising ID, reset it andturn on/off the personalised advertisings based onyour interests.Netflix ESN: Display your ESN number. ESNnumber is an unique ID number for Netflix, createdespecially to identify your TV.Date & time: Set the date and time options of yourTV. You can set your TV to automatically updatethe time and date data over the network or over thebroadcasts. Set corresponding to your environmentand preference. Disable by setting as Off if you wantto manually change the date or time. Then set date,time, time zone and hour format options.TimerPower On Time Type: Set your TV to turn on byitself. Set this option as On or Once to enable apower on timer to be set, set as Off to disable. Ifset as Once the TV will turn on only once at thedefined time in Auto Power On Time option below.Auto Power On Time: Available if the Power OnTime Type is enabled. Set the desired time for yourTV to come on from standby using the directionalbuttons and press OK to save the new set time.Power Off Time Type: Set your TV to turn off byitself. Set this option as On or Once to enable apower off timer to be set, set as Off to disable. Ifset as Once the TV will turn off only once at thedefined time in Auto Power Off Time option below.Auto Power Off Time: Available if the Power OffTime Type is enabled. Set the desired time for yourTV to go to standby using the directional buttons andpress OK to save the new set time.Language: Set your language preference.Keyboard: Select your keyboard type and managekeyboard settings.Inputs: Show or hide an input terminal, change thelabel for an input terminal, and configure the optionsfor HDMI CEC(Consumer Electronic Control) functionand display the CEC device list.Power: This menu has the same options as in TVOptions>Power menu. Check the Timer and ScreenSaver options in Settings>Device Preferences menuand Auto Sleep option in TV Options>AdvancedOptions menu for more power related functions.Picture off: Select this option and press OK toturn the screen off. Press a button on the remoteor on the TV to turn the screen on again. Note thatyou can not turn the screen on via the Volume +/-,Mute and Standby buttons. These buttons willfunction normally.No Signal Auto Power Off: Set the behaviour ofthe TV, when no signal is detected from the currentlyset input source. Define a time after which you wantyour TV to turn itself off or set as Off to disable.PicturePicture Mode: Set the picture mode to suit yourpreference or requirements. Picture mode can beset to one of these options: User, Standard, Vivid,Sport, Movie and Game. You can use User modeto create customised settings.Backlight, Brightness, Contrast, Colour, Hue,Sharpness settings will be adjusted according tothe selected picture mode. If one of these settingsis changed manually, Picture Mode option will bechanged to User, if not already set as User.Auto Backlight: Set your auto backlight preference.Off, Low, Middle and Eco options will be available.Set as Off to disable.Backlight: Adjust the backlight level of the screenmanually. This item will not be available if the AutoBacklight is not set as Off.Brightness: Adjust the brightness value of thescreen.Contrast: Adjust the contrast value of the screen.Colour: Adjust the colour saturation value of thescreen.Hue: Adjust the hue value of the screen.Sharpness: Adjust the sharpness value for theobjects displayed on the screen.Gamma: Set your gamma preference. Dark, Middleand Bright options will be available.Colour Temperature: Set your colour temperaturepreference. User, Cool, Standard and Warm opti-ons will be available. You can adjust red, green andblue gain values manually. If one of these valuesis changed manually, Colour Temperature optionwill be changed to User, if not already set as User.Display Mode: Set the aspect ratio of the screen.Select one of the predefined options according toyour preference.HDR: Turn the HDR function on or off. This item willbe available if HDR content is detected.Advanced VideoDNR: Dynamic Noise Reduction (DNR) is theprocess of removing noise from digital or analoguesignal. Set your DNR preference as Low, Medi-um, Strong, Auto or turn it off by setting as Off.MPEG NR: MPEG Noise Reduction cleans upblock noise around outlines and noise on the back-