Panasonic TX-24MS480B Operating Instructions Manual

Panasonic TX-24MS480B Operating Instructions Manual Manual pdf 15 page image

English - 14 -Default Channel: Set your default startup channelpreference. When the Select Mode is set asUser Select, Show Channels option will becomeavailable. Highlight and press OK to see channellist. Highlight a channel and press OK to make aselection. Selected channel will be displayed, everytime the TV is turned back on from any standbymode. If the Select Mode is set as Last Status, thelast watched channel will be displayed.Interaction Channel: Turn the Interaction Channelfunction on or off. This feature is useful in the UKand Ireland only.MHEG PIN Protection: Turn the MHEG PINprotection function on or off. This setting enables ordisables access some of the MHEG applications.Disabled applications can be released by enteringthe right PIN. This feature is useful in the UK andIreland only.HBBTV SettingsHBBTV Support: Turn the HBBTV function onor off.Do Not Track: Set your preference regarding thetracking behaviour for HBBTV services.Cookie Settings: Set your cookie settingpreference for HBBTV services.Persistent Storage: Turn the Persistent Storagefunction on or off. If set as On cookies will bestored with an expiry date in the persistentmemory of the TV.Block Tracking Sites: Turn the Block TrackingSites function on or off.Device ID: Turn the Device ID function on or off.Reset Device ID: Reset the device ID for HBBTVservices. Confi̇rmati̇on dialogue will be displayed.Press OK to proceed, Back to cancel.FreeviewPlay Settings: Press OK to display theterms and conditions for Freeview Play services.You can accept or decline using the related optionson the side of the screen. Refer to Freeview PlayPlatform section for more information.SubtitleAnalogue Subtitle: Set this option as Off, Onor Mute. If Mute option is selected, the analoguesubtitle will be displayed on the screen but thespeakers will be muted simultaneously.Digital Subtitle: Set this option as Off or On.Subtitle Tracks: Set your subtitle track preference,if any available.Digital Subtitle Language: Set one of the listedlanguage options as first digital subtitle languagepreference.Second Digital Subtitle Language: Set oneof the listed language options as second digitalsubtitle language preference. If the selectedlanguage in the Digital Subtitle Language optionis not available, the subtitles will be displayed inthis language.Subtitle Type: Set this option as Normal orHearing Impaired. If Hearing Impaired optionis selected, it provides subtitle services to deafand hard of hearing viewers with additionaldescriptions.TeletextDigital Teletext Language: Set the teletextlanguage for digital broadcasts.Decoding Page Language: Set the decodingpage language for teletext display.BISS Key: “Click To Add Biss Key” message willbe displayed. Press OK button to add a biss key.Frequency, Symbol Rate (KSym/s), Polarisation,Programme ID and CW Key parameters will beavailable to be set. Once you are done with thesettings highlight Save Key and press OK tosave and add the biss key. This option will not beavailable if the Channel Installation Mode underthe Settings>Channel menu is not set as PreferredSatellite, General Satellite or Satellite. Availableoptions will differ depending on the selected countryduring the initial setup process.Auto Sleep: Define an idle time after which youwant your TV to enter sleep mode automatically. 4Hours, 6 Hours and 8 Hours options are available.Set as Never to disable.System Information: Display detailed systeminformation on the current channel such as SignalLevel, Signal Quality, Frequency etc.Version Info: Display system information such asModel Name and Version.Settings: Refer to Settings section for detailedinformation.SettingsYou can access the Settings menu from the HomeScreen or from the TV options menu in Live TV mode.Network & InternetYou can configure your TV’s network settings usingthe options of this menu. You can also highlight theConnected/Not Connected icon on the Home screenand press OK to access this menu.Wi-Fi: Turn the wireless LAN (WLAN) function onand off.