Day/Time SetupTime MON 99:99SetTime 99:99Day MONDay/Time SetupTime MON 99:99SetTime 10:00Day TUELandscapePortraitDisplay orientationItalianoEspañolENGLISH (US)English (UK)DeutschFrançaisOSD LanguageSetSelectNote:The screens are not displayed if a tuner board has been equipped when setting up. Also they will not bedisplayed from the next time the power is turned on after the settings are completed once.Make the settings in the following menus as necessary.OSD Language (see page 43)Day/Time Setup (see page 33)Display orientation (see page 43)16Power On / OffWhen rst switching on the unitFollowing screen will be displayed when the unit is turned on for the rst time.Select the items with the remote control. Unit buttons are invalid.Power ON warning messageThe following message may be displayed when turning the unit power ON:No activity power off Precautions’No activity power off’ is enabled.If “No activity power off” in Setup menu is set to “Enable”, a warning message is displayed every timethe power is turned ON. (see page 43)This message display can be set with the following menu: Options menuPower On Message (see page 54)OSD Language Day/Time Setup Display orientation1 Select thelanguage.2 Set.1 For vertical installation,select “Portrait”.2 Set.1 Select “Day” or“Time”.2 Setup “Day” or“Time”.1 Select “Set”.2 Set.