11EnglishPower On / OffPress the button on the remote control to turn the Display off.Power Indicator: Red (standby)Press the button on the remote control to turn the Display on.Power Indicator: GreenTurn the power to the Display off by pressing the switch on the unit, whenthe Display is on or in standby mode.Note:During operation of the power management function, the power indicator turnsorange in the power off state.Connecting the plug to the Wall OutletNotes:• Main plug types vary between countries. The powerplug shown at right may, therefore, not be the type tted to your set.• When disconnecting the AC cord, be absolutely sureto disconnect the AC cord plug at the socket outletrst.Press the Power switch on the Display to turn the seton: Power-On.Power Indicator: Green[Starting up the touch screen and network]It takes some time for the touch screen and networkto start up just after the power is turned on.During that time, “Touch Screen Settings”, “NetworkSettings” in the “Setup” menu is grayed out andcannot be set.Connecting the AC cord plug to the Display.Power switchPower Indicator Remote Control Sensor