Panasonic TH-50PF30U Service Manual

Also see for TH-50PF30U: Operating instructions Operating instructions Service manual

Contents

Panasonic TH-50PF30U Service Manual Manual pdf 11 page image

TH-50PF30UOption Menu for GPF14DMON seriesGPF14DMON chassis series have special function and operation setting facility called Option Menu. This Option Menu isuseful for special function required custom ers. This should be set at the installation stage.Option menus default setting ContentsAudio input select --- Set up the sound when an image input is selected.Touch Panel settings --- Set while using Touch Panel (available as an option).Onscreen display On Enable/Disable to display input mode indication after power on and no signalindication.Initial Input Off Sets the initial input mode when the power is turned on. Allow input mode selection while power is on.Initial VOL level Off Sets the initial volume level when the power is turned on. Allow Volume controlwhile power is on.Maximum VOL Level Off Sets the maximum volume to desired level. Volume cannot exceed this level.Input lock Off Fixes the input mode to PC, VIDEO, Component/RGB, HDMI or DVI. Can notchange input mode by input selection key.Button lock Off Enable/Disable bottom operation buttons (Input, Menu, Enter and/or volume up/down)Remocon User Level Off Remote key invalidation.Off: Valid key is all key of remote.User1: Valid key are only Stand-by (ON/OFF), Input, RECALL, Sound mute On/Off, and volume adjustment.User2: Valid key is only Stand-by (ON/OFF).User3: All keys are null and voidOff-timer function Enable Off-timer operation Enable/Disable.Initial Power Mode Normal Sets the power mode of the unit for when the power recovers from failure orafter plugging off and in again.ID select 0 Sets panel ID number when panel is used in “ Remote ID” or "Serial ID”.Set value range: 0 - 100.(Standard value: 0)Remote ID Off Remote ID function On/Off.(While the Remote ID on, standard remote function can not control the unit.)Serial ID Off Serial ID function On/OffDisplay size Off Display size function On/OffStudio W/B Off Studio W/B function On/OffStudio Gain Off Studio Gain function On/OffPower On Screen Delay Off You can set the power-on delay time of the displays to reduce the power load,when you press ( ! ) / 1 to turn on the multiple displays that are set together, forexample, on MULTI DISPLAY system.Set each display's setting individually.All Aspect Off Aspect mode: default/All aspect mode.Auto Setup Manual Sets the operational mode of the automatic position adjustment in the POS./SIZE menu.Rotate Off Rotate function On/OffPower On Message (No activity poweroff)On Whether to show/hide No activity power off Precautions at the time of power ONis set.Note:W hen both main unit buttons and remote control are disabled due to the “ Button lock”, “ Remocon User level” or “Remote ID”adjustments, set all the values “O ff” so that all the buttons are enabled again.Press the “Volume dow n” button on main unit together with “ R” button on the remote control and hold for more than 5 seconds.The “SHIPPING" menu is displayed and the lock is released when it disappears.11