4Safety PrecautionsWhen using the LCD DisplayThe Display is designed to operate on 220 - 240 V AC, 50/60 Hz.Do not cover the ventilation holes.• Doing so may cause the Display to overheat, which can cause re or damage to the Display.Do not stick any foreign objects into the Display.• Do not insert any metal or ammable objects into the ventilations holes or drop them onto the Display, as doing socan cause re or electric shock.Do not remove the cover or modify it in any way.• High voltages which can cause severe electric shocks are present inside the Display. For any inspection, adjustmentand repair work, please contact your local Panasonic dealer.Ensure that the mains plug is easily accessible.An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthingconnection.Do not use any power supply cord other than that provided with this unit.• Doing so may cause re or electric shocks.Securely insert the power supply plug as far as it will go.• If the plug is not fully inserted, heat may be generated which could cause re. If the plug is damaged or the wallsocket is loose, they shall not be used.Do not handle the power supply plug with wet hands.• Doing so may cause electric shocks.Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plugbody, not the cable.• Do not damage the cable, make any modications to it, place heavy objects on top of it, heat it, place it near anyhot objects, twist it, bend it excessively or pull it. To do so may cause re and electric shock. If the power cable isdamaged, have it repaired at your local Panasonic dealer.Do not remove covers and NEVER modify the Display yourself• Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable partsinside. (High-voltage components may cause serious electrical shock.)• Have the Display checked, adjusted, or repaired at your local Panasonic dealer.Keep the Pen Stand xing screw out of reach of children to prevent swallowing.If the Display is not going to be used for any prolonged length of time, unplug the power supply plug fromthe wall outlet.To prevent the spread of re, keep candles or other open ames away from this product at all times.If problems occur during useIf a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come outfrom the Display, immediately unplug the power supply plug from the wall outlet.• If you continue to use the Display in this condition, re or electric shock could result. After checking that the smokehas stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the Displayyourself is extremely dangerous, and shall never be done.If water or foreign objects get inside the Display, if the Display is dropped, or if the cabinet becomes damages,disconnect the power supply plug immediately.• A short circuit may occur, which could cause re. Contact your local Panasonic dealer for any repairs that need tobe made.