9EnglishRequest Regarding SecurityWhen using this product, take safety measuresagainst the following incidents.• Personal information being leaked via this product• Unauthorized operation of this product by a maliciousthird party• Interfering or stopping of this product by a maliciousthird partyTake sufficient security measures.• Set a password for the LAN control and restrict theusers who can log in.• Make your password difficult to guess as much aspossible.• Change your password periodically.• Panasonic Corporation or its affiliate companies willnever ask for your password directly. Do not divulgeyour password in case you receive such inquiries.• The connecting network must be secured by afirewall, etc.• When disposing the product, initialize the data beforedisposing.[Shipping]Cleaning and maintenanceThe front of the liquid crystal panel has beenspecially treated. Wipe the surface of the liquidcrystal panel gently using only a cleaning cloth or asoft, lint-free cloth.• If the surface is particularly dirty, wipe with a soft,lint-free cloth which has been soaked in pure water orwater in which neutral detergent has been diluted 100times, and then wipe it evenly with a dry cloth of thesame type until the surface is dry.• Do not scratch or hit the surface of the panel withfingernails or other hard objects, otherwise thesurface may become damaged. Furthermore, avoidcontact with volatile substances such as insectsprays, solvents and thinner, otherwise the quality ofthe surface may be adversely affected.If the cabinet becomes dirty, wipe it with a soft, drycloth.• If the cabinet is particularly dirty, soak the cloth inwater to which a small amount of neutral detergenthas been added and then wring the cloth dry. Use thiscloth to wipe the cabinet, and then wipe it dry with adry cloth.• Do not allow any detergent to come into direct contactwith the surface of the Display. If water droplets getinside the unit, operating problems may result.• Avoid contact with volatile substances such as insectsprays, solvents and thinner, otherwise the quality ofthe cabinet surface may be adversely affected or thecoating may peel off. Furthermore, do not leave it forlong periods in contact with articles made from rubberor PVC.Usage of a chemical cloth• Do not use a chemical cloth for the panel surface.• Follow the instructions for the chemical cloth to use itfor the cabinet.Wired LANWhen setting up the Display at a place, whereelectric statistic occurs often, take a sufficient anti-static measure before start using.• When the Display is used at a location, wherestatic electricity occurs often, such as on a carpet,communications of the wired LAN or DIGITAL LINKare disconnected more often. In that case, removestatic electricity and the noise source that may causeproblems with an antistatic mat, and re-connect thewired LAN or DIGITAL LINK.• In rare cases, the LAN connection is disabled dueto static electricity or noise. In that case, turn off thepower of the Display and the connected devices onceand then re-turn on the power.The Display may not work properly due to strongradio wave from the broadcast station or the radio.• If there is any facility or equipment, which outputsstrong radio wave, near the installation location, setup the Display at a location sufficiently far from thesource of the radio wave. Or, wrap the LAN cableconnected to the DIGITAL LINK / LAN terminal byusing a piece of metal foil or a metal pipe, of which isgrounded at both ends.DisposalWhen disposing the product, ask your localauthority or dealer about the correct methods ofdisposal.