42 WarningThis LCD Display is for use only with the following optional accessories. Use with any other type of optionalaccessories may cause instability which could result in the possibility of injury.(All of the following accessories are manufactured by Panasonic Corporation.)Remote Control Kit.................................... TY-RM50VWCover-frame Kit........................................TY-CF47VW5Always be sure to ask a qualified technician to carry out set-up.Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children.Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to preventthem from being played with by young children, creating the potential risk of suffocation.Do not place the Display on sloped or unstable surfaces, and ensure that the Display does not hang overthe edge of the base.The Display may fall off or tip over.Do not place any objects on top of the Display.If water is spills onto the Display or foreign objects get inside it, a short-circuit may occur which could result infire or electric shock. If any foreign objects get inside the Display, please consult your local Panasonic dealer.Transport only in upright position!Transporting the unit with its display panel facing upright or downward may cause damage to the internalcircuitry.Ventilation should not be impeded by covering the ventilation openings with items such as newspapers,table cloths and curtains.For sufficient ventilation;Leave a space of 3-15/16” (10 cm) or more at the top, bottom, left, and right to the outermost circumference ofthis Display.Leave a space of 1-31/32” (5 cm) or more at the rear.Cautions for Wall InstallationWall installation should be performed by an installation professional. Installing the Display incorrectly may leadto an accident that results in death or serious injury. Furthermore, when installing on a wall, a wall hanging bracketthat conforms to VESA standards (VESA 400 × 400) must be used.When using the LCD DisplayThe Display is designed to operate on 220 - 240 V AC, 50/60 Hz.Do not cover the ventilation holes.Doing so may cause the Display to overheat, which can cause fire or damage to the Display.Do not stick any foreign objects into the Display.Do not insert any metal or flammable objects into the ventilations holes or drop them onto the Display, as doingso can cause fire or electric shock.Do not remove the cover or modify it in any way.High voltages which can cause severe electric shocks are present inside the Display. For any inspection,adjustment and repair work, please contact your local Panasonic dealer.