47TH-42PH9BK/S TH-50PH9BK/SPower Source 220 - 240 V AC, 50/60 HzPower ConsumptionPower on 330W 440WStand-by condition Save off 0.8 W, Save on 0.6 W Save off 0.7 W, Save on 0.5 WPower off condition 0.2 W 0.3 WPlasma Display panel Drive method : AC type42-inch, 16:9 aspect ratioDrive method : AC type50-inch, 16:9 aspect ratioContrast Ratio Max 10000:1Screen size 920 mm (W) × 518 mm (H)× 1,056 mm (diagonal)1,106 mm (W) × 622 mm (H)× 1,269 mm (diagonal)(No.of pixels) 786,432 (1,024 (W) × 768 (H))[3,072 ×768 dots]1,049,088 (1,366 (W) × 768 (H))[4,098 × 768 dots]Operating conditionTemperature 0 °C - 40 °CHumidity 20 % - 80 %Applicable signalsColour System NTSC, PAL, PAL60, SECAM, Modified NTSCScanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 50i · 24p ·25p · 30p · 24sF ···· SMPTE274M, 1250 (1080) / 50iPC signals VGA, SVGA, XGA,SXGA, UXGA ···· (compressed)Horizontal scanning frequency 15 - 110 kHzVertical scanning frequency 48 - 120 HzConnection terminalsAV VIDEO IN (BNC)S VIDEO IN (MINI DIN 4PIN)AUDIO IN (RCA PIN JACK × 4)1.0 Vp-p (75 Ω or high impedance)Y:1 Vp-p (75 Ω), C:0.286 Vp-p (75 Ω)0.5 VrmsPC (HIGH-DENSITY MINI D-SUB 15PIN)B/PB/CB:R/PR /CR :HD/VD:VBS (use HD port)AUDIO IN (M3 JACK)Y or G with/sync 1.0 Vp-p (75 Ω)Y or G without/sync 0.7 Vp-p (75 Ω)0.7 Vp-p (75 Ω)0.7 Vp-p (75 Ω)1.0 - 5.0 Vp-p (high impedance)with/picture 1.0 Vp-p (high impedance)without/picture 0.3 Vp-p (high impedance)0.5 VrmsSERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLESPEAKERS (6 Ω) 16W [8 W + 8 W] (10 % THD)Accessories SuppliedRemote Control Transmitter EUR7636090RBatteries 2 × R6 SizeFixing bands (TMME203 or TMME187) × 2Dimensions (W × H × D) 1,020 mm × 610 mm × 89 mm 1,210 mm × 724 mm × 95 mmMass (weight)main unit only approx. 27.0 kg net approx. 37.0 kg netwith speakers approx. 31.0 kg approx. 41.0 kgNotes:• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.• This equipment complies with the EMC standards listed below.EN55022, EN55024, EN61000-3-2, EN61000-3-3.Specifi cations