ItalianoEspañolENGLISH (US)English (UK)DeutschFrançaisOSD LanguagePRESENT TIME SetupPRESENT TIME MON 99 : 99SetPRESENT TIME 99 : 99DAY MONPRESENT TIME SetupPRESENT TIME MON 99 : 99SetPRESENT TIME 10 : 00DAY TUEPower ON warning messageThe following message may be displayed when turning the unit power ON:No activity power off Precautions’No activity power off’ is enabled.If “No activity power off” in Setup menu is set to “Enable”, a warning message is displayed every timethe power is turned ON. (see page 31)This message display can be set with the following menu: Options menuPower On Message (see page 42)14Power On / OffWhen fi rst switching on the unitFollowing screen will be displayed when the unit is turned on for the first time.Select the items with the remote control. Unit buttons are invalid.OSD LanguagePRESENT TIME Setup1 Select the language.2 Set.1 Select “DAY” or “PRESENT TIME”.2 Setup “DAY” or “PRESENT TIME”.Notes:• Once the items are set, the screens won't be displayed when switching on the unit next time.• After the setting, the items can be changed in the following menus.OSD Language (see page 33)PRESENT TIME Setup (see page 27)No activity power off (see page 31)1 Select “Set”.2 Set.Display will be turned offwhen there is no activity for 4 hours.Disable EnableNo activity power offAre you sureyou want to enable ’No activity power off’ ?NoYesNo activity power off1 To enable No activity power off, select “Enable”.2 Set.1 “Select “Yes” or “No”.2 Set.If selecting “Enable”, aconfirmation window appears.No activity power off