Panasonic TH-40CX610Z Operating Instructions Manual

Contents

Panasonic TH-40CX610Z Operating Instructions Manual Manual pdf 13 page image

English 13Tick the TV signal mode to tune, and then select[Start Auto Tuning]: tune (search for the available channels): skip tuningSelect your region (Satellite)Auto Tuning is now complete and theTV is ready for viewing.If tuning has failed check the Satellite cable, RF cable,and the network connection, and then follow the on-screen instructions.Note● The TV goes into Standby mode when no operationis performed for 4 hours if [Auto Standby] in the TimerMenu is set to [On].● The TV goes into Standby mode when no signalis received and no operation is performed for 10minutes if [No signal Power off] in the Timer Menu isset to [On].● To retune all channels[Auto Tuning] in [Tuning Menu] (Setup Menu)● If no satellite channel is found, set [LNB BandFrequency] to suit your environment.[LNB Configuration] in [Satellite TV TuningMenu] (Setup Menu)● To add the available TV signal mode later[Add TV Signal] in [Tuning Menu] (Setup Menu)● To initialise all settings[Shipping Condition] in [System Menu] (SetupMenu)First time AutoTuningWhen the TV is turned on for the first time, it willautomatically search for available TV channels and giveoptions to set up the TV.● These steps are not necessary if the setup has beencompleted by your local dealer.● Please complete connections (p. 8 - 10) and settings(if necessary) of the connected equipment beforestarting Auto Tuning. For information about thesettings for the connected equipment, read themanual of the equipment.1 Plug the TV into a live mains socketand turn the power on● Takes a few seconds to be displayed.2 Select the following itemsSet up each item by following the on-screen instructions.Example:Please select your viewing environment.Home Shop■ How to use the remote controlMove the cursorAccess the item / store the settingReturn to the previous item (if available)Select the languageSelect [Home]Select [Home] for use in a home viewing environment.● [Shop] is for shop display.● To change the viewing environment later on, the setwill need to have all settings initialised by accessingShipping Condition.Set up the network connection