Panasonic TC TC-P58S1 Operating Instructions Manual

Also see for TC-P58S1 - 58" Plasma TV: Quick setup guide Specifications Service manual Manual de instrucciones

Panasonic TC TC-P58S1 Operating Instructions Manual Manual pdf 33 page image

33AdvancedVIERA Link TM “HDAVI Control TM”(Continued)At the start of the DIGA, Player theater, or RAM theater playback, the TV’s input automatically switches to the inputbased on the playback equipment.For the RAM theater, the speakers automatically switch to the theater system.If using the DIGA operation, the TV’s input automatically switches to the DIGA and DIGA menu is displayed.When “Yes” is selected (p. 29), TV is turned on automatically and switches to the appropriate HDMI input wheneverVIERA Link compatible equipment is initially turned on and Play mode is selected.When “Yes” is selected (p. 29) and the TV is turned off, all connected VIERA Link compatible equipment is alsoautomatically turned off.DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.Caution: The TV remains on even if the VIERA Link compatible equipment is turned off.ConditionPower off link: Yes, Stand-by power save: YesThe equipment has “HDAVI Control 4 (with quick start mode)” connected with HDMI cable.When TV is turned off, all connected VIERA Link compatible equipment is moved to ECO standby mode*automatically under above conditions.* Minimum power consumption of standby condition for the equipment.ConditionAuto power stand-by: Yes,The equipment has “HDAVI Control 2 or later” (for available equipment only) connected with HDMI cable.[ Examples of timing for operation ]• When the input is switched from HDMI.• When the "Speaker output" is changed from "Home theater" to "TV".The connected VIERA Link compatible equipment will be turned off automatically when not in use.“TV” is the default setting. To set the Home Theater system as default speakers, change the default speakerssetting from “TV” to “Theater”. Sound will be output from the Home Theater whenever the TV is powered on.If the “ONE TOUCH PLAY” key is pressed on the remote control for Panasonic Home Theater system, the followingsequence of operations is performed automatically.Home Theater power switches On, and playback begins.TV power switches On, and the playback screen is displayed.Audio is muted on the TV and switches to the theater system.The following information about the TV settings can be transmitted to each piece of equipment (Recorder/Hometheater/Player) that has “HDAVI Control 3 or later” function connected to a TV with HDMI cable.Transmittable data Recorder Home theater PlayerOn Screen Display Language setting(English/Español/Français) ○ ○ ○Panel Aspect Ratio(16:9 fixed) ○ ○ ○Closed caption information(Mode/CC type/Digital setting) ○ --- ---Channel information(Input signal/Channel list/Caption information) ○ --- ---NoteThere is a possibility that all the GUI language information might be set from equipment that has HDMI CECfunction connected to TV with HDMI cable. Depending on operating conditions or the specification for each pieceof equipment the setting may or may not be applied.For more details on the external equipment’s operation, please refer to the operating manuals for the equipment.[For Recorder]You cannot operate other functions while transmitting TV’s information above except Power On/Off key operation.When you turn off this unit, the transmission will be interrupted (only when you are transmitting Channel information).Minimizes lip-sync delays between the picture and audio when you connect to a Panasonic theater system orAmplifier.