9Quick StartGuide Accessories/Optional AccessoryAccessoriesAssembly screwsA(for 58”)M5 × 25 (Silver) (4)(for 65”)M5 × 30 (Silver) (6)B(for 58”)M5 × 30 (Black) (4)(for 65”)M6 × 25 (Black) (4)Poles (2)(for 58”)L RL or R is printed at thebottom of the poles.(for 65”)FrontBackBase (1)(for 58”)(for 65”)Allen wrench(included tool only for 65”)CAttaching the pedestal to TV■Assembling the pedestal[TC-P58V10X (TBLX0102)] [TC-P65V10X (TBLX0126)]Fix securely with assembly screws A .(Total 4 screws)Tighten screws firmly.Fix securely with assembly screws A .(Total 6 screws)Tighten screws firmly usingAllen wrench CALRPoleFrontPoleBaseACPoleFrontPoleBase■Set-upCarry out work on a horizontal and level surface.Tighten screws firmly.BFix securely with assemblyscrews B . (Total 4 screws)Rear sideArrowmarkPoleHole for pedestalinstallationPoleBaseBottom view(Image: TC-P58V10X)WarningDo not disassemble or modify the pedestal.Otherwise the TV may fall over and become damaged, and personal injurymay result.CautionDo not use any other TV and displays.Otherwise the TV may fall over and become damaged, and personal injurymay result.Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal when it is physically damaged, personal injury may result.Contact your nearest Panasonic Dealer immediately.During set-up, make sure that all screws are securely tightened.If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not bestrong enough to support the TV, and it might fall over and become damaged, and personal injury may result.