31Viewing Network CameraExample of Network Camera connectionLANInternetEthernetcableRouterInternet equipmentSet Internet setting (LAN) forconnected equipment with Internetequipment if you need to.* You cannot set Internet settingfrom this TVCable/DSLmodemBack of the TV Network CameraNetworkCamerasettingDisplay Menu ■Network Camera setting operationR GB YSelectRETURNOKNetwork cameras listModel Status Default...............................................................Camera nameBL-C210A ConnectedCamera 1Find cameras DeleteDisconnect Default cameraSelect “Setup”MenuPictureAudioVIERA LinkSD cardClosed captionSetupselectokSelect “Network cameras list” “Please refer to camera’s settings and enable itslink mode. Start searching for network camera?”“Yes” to start camera search.Before you start to search for a camera,switch the camera to registration mode.(For this operation, please refer tothe operating manual for the Networkcamera.)Search condition also depends on“Network setting” (p.44)“Remove camera information?”“Yes” to delete camera information.“Disconnect to camera?”“Yes” to delete camera connection.“Disconnected” will be displayed in“Status”“Set this camera as default camera?”“Yes” to set to the default use.Displayed “(Default)” next to cameraname.(Available only when reconnecting)“Connect to Camera?“Yes”: “Connect” will be displayedin “Status” (Attach up to 8 Networkcameras simultaneously)Setup 2/2VIERA Link settingsNetwork settingVIERA CAST settingNetwork cameras listselectokIf there is no registered cameraSelect “Yes” to start searchPlease refer to camera’s settings and enable its linkmode.Start searching for network camera?Yes NoselectokSet Network Camera settingR GB YSelectRETURNOKNetwork cameras listModel Status Default...............................................................Camera nameBL-C210A ConnectedCamera 1Find cameras DeleteDisconnect Default cameraselect