Panasonic TC-26LX70 Operating Instructions Manual

Also see for TC-32LX70 - 32" LCD TV: Technical guide Operating instructions Operating instructions Service manual Operating instructions

Contents

Panasonic TC-26LX70 Operating Instructions Manual Manual pdf 44 page image

Technical Information (Continued)You can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and "Multi Channel" amplifierto the DIGITAL AUDIO OUT terminals.Caution -)@Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disableoptical output.@External speakers cannot be connected directly to OUTPUT terminals.@When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When anNTSC channel is selected, the output will be PCMHDMI connections to some Panasonic equipment allow you to interface automatically. (p. 26)@This function may not work normally depending on the equipment condition.@The equipment can be operated by other remote controls with this function on even if TV is in Standby mode.@Image or sound may not be available for the first few seconds when the playback starts.@Image or sound may not be available for the first few seconds when Input mode is switched.@Volume function will be displayed when adjusting the volume of the equipment.@If you connect the same kind of equipment at once (for example: one DIGA to HDMI 1 / another DIGA to HDMI 2),EZ Sync TM is available for the terminal with the smaller number.@If you connect the equipment that has "HDAVl Control 2" function to the TV with HDMI cable, the sound fromDIGITAL AUDIO OUT terminal can be output as multi channel surround.; II]_VAIi.,[o] il i[_@ | [o]iHDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connectingthe TV unit and the devices.HDMI-compatible equipment ('1) with an HDMI or DVl output terminal, such as a set-top box or a DVD player, can be connectedto the HDMI connector using an HDMI compliant (fully wired) cable.@ HDMI is the world's first complete digital consumer AV interface complying with a non-compression standard.@ If the external equipment has only a DVl output, connect to the HDMI terminal via a DVl to HDMI adapter cable (*2).@ When the DVl to HDMI adapter cable is used, connect the audio cable to the audio input terminal.@Audio settings can be made on the "HDMI 1 in" or "HDMI 2 in" menu screen. (p. 22)Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz('1): The HDMt logo is displayed on an HDMFcompliant device-_ (*2): Enquire at your local digital equipment retailer shopCaution J@ Use with a PC is not assumed.@ All signals are reformatted before being displayed on the screen.@ If the connected device has an aspect adjustment function, set the aspect ratio to "16:9".@ This HDMI connector is "type A".@ These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.@ A device having no digital output terminal may be connected to the input terminal of either "COMPONENT", "S VIDEO", or"VIDEO" to receive analog signals.@ The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i and 1080p.Match the output setting of the digital device.@ For details of the applicable HDMI signals, see next page.44