Panasonic TC-26LX70 Operating Instructions Manual

Also see for TC-32LX70 - 32" LCD TV: Technical guide Operating instructions Operating instructions Service manual Operating instructions

Contents

Panasonic TC-26LX70 Operating Instructions Manual Manual pdf 25 page image

(Continued)Adjustments/Configu rations (alternatives)Sets the mode to select the channel with Channel up/down button (Favorite./AII)@ Favorite.: Only channels registered as FAVORITE (p. 31)Selects the screen menu language (p. 16) LanguageAdjusts the clock (p. 16)Sets channels (p. 30) Program channel ]Selects the terminal and label of the external equipment (p. 32)[Comp./HDMI I/HDMI 2/Video l/Video 2Nideo 3]To prevent howling and image oscillation, stops output of the pictures and audio specified in this menu.(p. 32) (On/Off)Displays subtitles (Closed Caption) (p. 32)Controls equipment connected to HDMI terminals (p. 26) (On/Off)@ "Power off link", "Power on link", and "Default speakers" cannot be selected if "Off" is set.Sets "Power off link" of HDMI connection equipment (p. 26) (Set/No)Sets "Power on link" of HDMI connection equipment (p. 26) (Set/No)Selects the default speakers (p. 26) (TV/Theater)Turns TV On automatically when the cable box or a connected device is turned On (No/Set)_ The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set.(p. 34)To conserve energy, the TV automatically turns off when NO SIGNAL continues more than 10 minutes.(Set/No)Note@ Not in use when setting "Auto power on", "On!OffTimer", "Lock", or Digital channel.®. "No signal shut-off was activated" will be displayed for about 10 seconds when the TV is turned on forthe first time after turning the power off by "No signal shut-off".@ The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.To conserve energy, the TV automatically turns off when no operation of remote or front panel keycontinues more than 3 hours. (No/Set)Note® Not in use when setting "Auto power on" or "On/Off Timer".@ "No action shut-off was activated" will be displayed for about 10 seconds when the TV is turned on forthe first time after turning the power off by "No action shut off"._® The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark room.(Standard/Saving)Displays TV version and software license.EEZ Sync[ Defaultspeakers_ ][Auto power on _ ][No signal shut-off _ ]Performing Reset will clear all items set with Setup, such as channel settings. (p. 30)Adjustments/Configu rations (alternatives)Sets the mode to select the channel with Channel up/down button (Favorite./All)Sets favorite channels. (p. 19)Displays Closed Caption. (p. 32-33)Changes the station identifier. (p. 30-31 )Checks the signal strength if interference or freezing occurs on a digital image. (p. 30-31 )@..-.. -F"O O-=,6PcQ..t- "33o 5,-*.vOo25