Panasonic TC-14Z88RQ Service Manual

Contents

Panasonic TC-14Z88RQ Service Manual Manual pdf 20 page image

http://202.224.189.179/viewing/OT/TC-14Z88RQ/SVC/s0207000000.html4. Apply a crosshatch pattern signal and adjust the static convergence magnets to the approximatelycorrect position.5. Receive a black and white signal.6. Set the control as follows:Red................minimumGreen.............minimumBlue...............minimumPress the Shipping button on the remote control twice to select CRT Adjustment Mode to selectlow light.7. Loosen the clamp screw for the Deflection Yoke A in Fig. 10 and move the Deflection Yoke asclose to the purity magnet as possible.8. Adjust the purity magnetic rings so that a vertical green field is obtained at the centre of thescreen.Fig. 69. Slowly push the Deflection Yoke and set it where a uniform green field is obtained.Fig. 2110. Re-adjust the Low Light controls to their correct settings and make sure that a uniform whitefield is obtained.11. Tighten the clamp screw A in Fig. 10.http://202.224.189.179/viewing/OT/TC-14Z88RQ/SVC/s0207000000.html (2 of 5)10.02.2006 2:30:15