AMTry various directions to obtainoptimum reception.FMThe headphone/earphone cord is alsothe FM antenna, so extend it instead of leaving it coiled.8Change the frequency step according to the area.Preparation: Press [RADIO/BAND] to switch on the power.Press and hold [RADIO/BAND]until the step appears.Within 10 secondsPress to select the step.Each time you press [j :, 9 i]Within 10 secondsPress and hold [MEMORY/RECALL] until the frequency appearsto confirm the step.∫To return to the previous frequency stepRepeat the above procedure.≥Changing the step erases the stations you stored in memory.To obtain good receptionTo select stereo or monaural FMWhen using overseasMONOU0.2 U0.1 EChanging the sound qualitySet to “MONO” when there is noise during FM reception.Sound becomes monaural, but noise is reduced.Each time you press [FM MONO/ST]The operation is the same as when playing CDs. (➪ page 6)To receive an FM broadcast clearlySet to “CITY” if reception is poor or if there is interference from anotherstation.Each time you press and hold [FM RECEPT %CITY/NOR]CITY No display(canceled) FM 0.2 MHz,AM 10 kHz(original setting)FM 0.1 MHz,AM 10 kHzFM 0.05 MHz,AM 9 kHzNo display(stereo)123Listening to the RadioMFM TUNEDJ U0.21 Attaching the unit base.R L3 Placing the main unit on the unit base and connecting theother cords.Back of the speakersTo [DC IN]Silver plugInsert intonotch.Listening through the speakers ONLYSL-J610VInsert until youhear it click intoplace.Grey cordTo [SP IN]4 Press [OPR] to turn the speakers on.OPR OFF ON≥The rechargeable batteries are also recharged in the unit base while the unit is off.≥Pressing [OPR] to turn off the speaker does not turn the main unit off. Press[∫ OPR OFF] on the main unit (twice when playing a CD) to turn the main unit off.≥These speakers do not have magnetic shielding. Keep them away fromtelevisions, computers, and other items easily affected by magnetism.Operations are the same using or not using the unit base and speakers.Front side of the right speakerUnit basePlace speaker withthe cords on theleft side.Insert grey cordlast.Gold plug Silver plugGold plugBottom of the speakersTo [Ë] To[DC IN]HouseholdAC outletKeep cord clear.RQT75882 Fitting cords into place on bottom of the unit base, andconnecting the grey cord to [SP IN].