Panasonic SC-PT550 Operating Instructions Manual

Contents

Panasonic SC-PT550 Operating Instructions Manual Manual pdf 20 page image

DISC OPERATIONSENGLISH ENGLISH20RQT8043 RQTX0038Advanced playDisplaying current playback condition Basics  DetailsFunctions Menu(\ page 23)Off (No on-screen display)7 BasicsExample: Current playbacknumberElapsedplay timeCurrent positionPlay modePlayback condition7 DetailsExample:Audio informationSubtitle informationAngle informationAspect of current titleTotal play time ofcurrent title• Video and audio information is notdisplayed during search.All group, Program and Random play(during stop)Program  Random  Off (Normal play)All group ( )To exit all group, program or random play modewhile stopped.(several times)• Selecting “Play as Data Disc” in Other Menu(\ page 26) will be effective if the following functionsare not available to play WMA, MP3, JPEG, MPEG4or DivX video contents.• Some items cannot be played even if youhave programmed them.• Some discs contain bonus groups. If apassword screen appears after selecting a group,enter the password with the numeric buttons to playthe bonus group. Refer also to the disc’s jacket.All group playAll Group PlaybackPress PLAY to startProgram play (up to 32 items)1 Press the numeric buttons to select the item.( Press [ENTER] toregister the selection.)Example:• Repeat this step to program other items.• To select a 2-digit numberExample: To select 12,2To select an item using the cursor buttonsPress [ENTER] and [5, ∞] to select an item, then press[ENTER] again to confirm.To select all the itemsWhile the “Chapter”, “Track” or“Content” field is highlighted, press[5, ∞] to select “ALL”.Then press [ENTER] again toconfirm.Example:To change the selected program1. Press [5, ∞] to select the program number.2. Press the numeric buttons to change each item.( Press [ENTER] toconfirm the selection.)To clear the selected program1. Press [5, ∞] to select the program number.2. Press [CANCEL] (or press [5, ∞, 2, 3] to select“Clear” and press [ENTER]).To clear the whole programSelect “Clear all” with [5, ∞, 2, 3] and press [ENTER].The whole program is also cleared when the unit isturned off, the disc tray is opened or another source isselected.Random play1 Press the numeric buttons to select a groupor title. ( Press[ENTER] to register the selection.)Example:Discs which have multiple groups.• To enter all groups, press [2, 3] to select “All” andpress [ENTER].• To deselect a group, press numeric buttonscorresponding to the group you want to clear.2