ENGLISH9RQT8043RQTX0028GETTING STARTEDConnect to the antenna.7 FM indoor antennaTape the antenna where reception isthe best.Connect to the various television terminals.• Do not connect the unit through a video cassette recorder.• Due to copy guard protection, the picture may not be displayed correctly.• Turn the television off before connecting, and refer to the television’s operating instructions.For Continental Europe7 Television with SCART terminalTelevision(not included)SCART cable(not included)Using the SCART (AV) terminalTo improve picture quality, you can change the video signal output from the SCART (AV) terminal from “VIDEO”to either “S -VIDEO” or “RGB” to suit the type of television you are using. Select “S-VIDEO” or “RGB” from“VIDEO OUT-SCART” in “VIDEO” tab (\ page 22).This connection will also enable you to play audio from your television through your home theater system. Refer to“Operating other equipment” (\ page 30).For Southeast Asia, Thailand, the Middle East, South Africa, Saudi Arabia and Kuwait7 Television with COMPONENT VIDEO IN terminalsTelevision(not included)Video cables(not included)Using the COMPONENT VIDEO OUT terminalsThe COMPONENT VIDEO OUT terminals provides a purer picture. These terminals can be used for eitherinterlaced or progressive output. Connection using these terminals outputs the color difference signals (P B /PR )and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors.• The description of the component video input terminals depends on the television or monitor (example: Y/P B /PR ,Y/B-Y/R-Y, Y/C B /C R ).• Connect to terminals of the same color.For Southeast Asia, Thailand, the Middle East, South Africa, Saudi Arabia and Kuwait7 Television with a VIDEO IN terminalTelevision(not included)Video cable(included)Adhesive tape