Panasonic SB-VK62GC Service Manual

Also see for SA-VK62D: Operating instructions

Panasonic SB-VK62GC Service Manual Manual pdf 3 page image

terminal and the cable from the left speaker to the left terminal.1. Strip off the outer covering, and twist the center conductor. Makesure the bare ends of the wires are not unravelled. (If they are,twist them tight again.)2. Insert the wire to the rear panel of the unit and close the lever.Notes :- To prevent damage to circuitry, never short-circuit positive (+) andnegative (-) speaker wires.- Be sure to connect only positive (red) wires to positive (+)terminals and negative (black) wires to negative (-) terminals.PlacementPlace the speaker so that the super tweeter is on the outside.Notes :- You cannot take the front net off the speakers.ConnectionUse only the supplied speakers.- Using other speakers can damage the unit and sound quality willbe negatively affected.- Set the speakers up on an even surface to prevent them fromfalling. Take proper precautions to prevent the speakers fromfalling if you cannot set them up on an even surface.Positioning for best effect.How you set up your speakers can affect the bass and the sound field. Note the following points.3PDF created with pdfFactory Pro trial version www.pdffactory.com