71For Your InformationDVD/Video CD/CD CorrectionPlay fails to start evenwhen PLAY is pressed... • This unit cannot play discs other than DVDs, Video CDs and CDs.• The disc may be dirty and require cleaning.Play starts but thenstopsimmediately...• Be sure disc is installed with label side up.Picture is distortedduring rapid advance orrapid reverse... • The picture will be somewhat distorted at times: this is normal.No Forward/Reversesearch play... • Some discs may have sections which prohibit Forward/Reverse search. (P.23)Play does not start evenwhen title is selected... • Confirm the “DVD LOCK” setting. (P. 65)Audio soundtrack and/orsubtitle language is notthe one selected at theinitial settings...• If the audio soundtrack and/or subtitle language selected at DVD initialsettings does not exist on the disc, it will not be accessible.No subtitles... • Subtitles appear only when available on disc.• Select “ON” at the “Subtitle language” section (P. 50) to display subtitles.Alternative audiosoundtrack(or subtitle) languagecannot be selected...• Alternative language cannot be selected with discs which do not containmore than one language.• For some discs, alternative language cannot be selected with the AUDIO orSUB TITLE button. Try selecting it from the DVD MAIN MENU if available.Angle cannot bechanged...• This function is dependent on software availability. Even if disc has multipleangles, they may be recorded for specific scenes only (ANGLE Indicator onunit lights up). (P. 52)Miscellaneous CorrectionVideo cassette cannotbe inserted... • Insert the cassette window side up; record tab facing you.Video cassette cannotbe removed... • Completely insert Power Plug into an AC outlet.Eject does not functionor insertion cannot bedone... • Turn the POWER off and then on, and try ejecting or inserting the tape again.Video cassette ejectswhen a recording isstarted, or the power isturned off for timerrecording...• Make sure cassette record tab is intact. (P. 4)The disc cannot beremoved...• First, unplug unit. Then, prepare a rigid wire (e.g. an extended paper clip,etc.) and, applying moderate force, insert it straight into the hole at the baseof the tray. The tray will eject a little. Now, pull the tray all the way out andremove the disc. (P. 12)In Stop mode, the VCRmotor (CYLINDER)continues to rotate..• To enable Quick Play mechanism, the VCR cylinder will rotate for about 3minutes. This reduces response time from Stop to Play mode and from Playto Rewind Search mode.