7EnglishInstallationRemoving the doorsIf the refrigerator will not pass through a doorway or entrance, its doors can be removed.CAUTIONBefore removing the doors, be absolutely sure to check that the power of the refrigerator has beenturned off.When you want to remove the doors, please contact your dealer, an authorized service centre oraccess to our Web site (http://panasonic.net).Panasonic or its Authorized agent cannot be held responsible if you remove the doors byyourself.Dimensions (mm): W900 × D610 × H1845 (Without Door)Removing the front grilleWhen the two doors are opened and the front grille is viewed fromabove, two screws – one on the left and the other on the right – willbe seen.Turn these screws counterclockwise, and remove them.There is a connecting area slightly to the right of the centre of thefront grille on its bottom. Take hold of this area, and pull the grilletoward you to remove it.Front grilleConnecting areaDisconnecting the water supply hosesRemove the connecting ring (black) of the water supply connector,pressing the coupler and pull the water supply hose free.● There are two water supply hoses, one for the Ice dispenser andone for the Water dispenser.Disconnect both of them.Connecting ringWater supplyconnectorCouplerReconnecting the water supply hosesFirst insert the connecting ring (black) into the water supplyconnector, and then insert the water supply hose.Insert the water supply hose into the water supply connector untilthe printed line on the hose is no longer visible.● Two water supply hoses connect the same colour. Connecting ringLine