Phone settings for using XSI services can be set using configuration parameters or the Web user interface(administrators only).See 4.3.7 Xtended Service Settings for making settings using the Web user interface.The following parameter names will be displayed and can be set as needed.Parameter Name Description ReferenceXSI_ENABLE Enables XSI services. Page 240XSI_SERVER Specifies the XSI server. Page 240XSI_SERVER_TYPE Specifies the communication method. Page 241XSI_SERVER_PORT Specifies the port used for communication withthe XSI server.Page 241XSI_USERID_n Specifies the user name for each user (account)that will use XSI.Page 241XSI_PASSWORD_n Specifies the password for each user (account)that will use XSI.Page 241XSI_PHONEBOOK_ENABLE_n Specifies whether to enable or disable the Xsiphonebook service.Page 242XSI_PHONEBOOK_CYCLIC_INTVL Specifies the interval, in minutes, betweenperiodic checks for updates of the Xsi Directory(Phonebook) files.Page 242XSI_PHONEBOOK_RESYNC_DURATIONSpecifies the time range, in minutes, duringwhich units will access the server at a randomtime.Page 242XSI_PHONEBOOK_TYPE_n Specifies the type of Xsi phonebook. Page 242XSI_CALLLOG_ENABLE_n Specifies whether to enable or disable the Xsicall log service.Page 243XSI_SIP_CREDENTIALS_ENABLE Specifies whether to enable or disable the XSISIP Credentials feature.Page 243NoteTo change settings for the following XSI services using a handset, the parameterADMIN_ABILITY_ENABLE_HSy="Y" (see Page 342) must be set. (WhenADMIN_ABILITY_ENABLE_HSy="N" is set, the settings can only be viewed.)• Remote Office ("Remote Office")• AnyWhere ("Anywhere")• Simultaneous Ring Personal ("SimultaneousRing")• Calling Line ID Delivery Blocking ("Anonymous Call")• Anonymous Call Rejection ("Block Anonymous")NoteThe text in parentheses are shown on the handset display.Operations for accessing the above XSI services1. /2. [ ]/[ ]/[ ]/[ ]: ®OK3. [ ]/[ ]: "Call Settings" ®OK372 Administrator Guide Document Version 2017-076.4.2 XSI Service Settings
