DEFAULT_LINE_SELECT_HSyParameter Name Example DEFAULT_LINE_SELECT_HS1, DEFAULT_LINE_SELECT_HS2, …,DEFAULT_LINE_SELECT_HS8Value Format Comma-separated IntegerDescription Specifies which lines (1–8) to seize automatically when going off-hookto make a call for each handset, using 8 whole numbers (0 or 1)separated by commas. This setting is available only when"MULTI_NUMBER_ENABLE" is set to enable.Value Range • 0: Disable• 1: EnableThe format must be "x,x,x,x,x,x,x,x" (x: line numbers 1 to 8 startingfrom the left)."1" must be specified only once as a line that can be seizedautomatically when going off-hook in this format.Default Value 1,0,0,0,0,0,0,0Web User Interface Reference Default (Page 151)INCOMING_CALL_GROUP_nParameter Name Example INCOMING_CALL_GROUP_1, INCOMING_CALL_GROUP_2, …,INCOMING_CALL_GROUP_8Value Format Comma-separated IntegerDescription Select the handset (1–8) that calls will arrive at for each line. This settingis available only when "MULTI_NUMBER_ENABLE" is set to enable.Value Range • 0: Disable• 1: EnableThe format must be "x,x,x,x,x,x,x,x" (x: handset number 1 to 8starting from the left).Default Value 1,1,1,1,1,1,1,1Web User Interface Reference Line (1–8) (Page 149)Phone Number (Page 150)Handset Number (1–8) (Page 150)PAGING_ENABLE_HANDSET_nParameter Name Example PAGING_ENABLE_HANDSET_1, PAGING_ENABLE_HANDSET_2, …,PAGING_ENABLE_HANDSET_8Value Format INTEGERDescription Select the handset (1–8) that calls will arrive (auto answer) at for eachline.• Paging• Click to xxDocument Version 2017-07 Administrator Guide 3355.3.32 Call Control Settings
