1.19 VFeature Manual 323his mailbox without dialing his mailbox number (Direct Mailbox Access). It is possible to disable thisfeature by COS programming on the VPS.7. VPS CO Line Service & Automatic Time Mode Notification for Incoming Call*Multiple tenants can share a single VPS; each tenant does not require a dedicated VPS port. If thedestination of the incoming CO line call is a VM (DPT) group, the PBX sends the VM trunk groupnumber and time mode (day/lunch/break/night) of the tenant (→ 1.17.5 Time Service) assigned for thecall to the VPS. Therefore the VPS can send the assigned message (company greeting) to the caller.Corresponding VM trunk group number and tenant number are determined by the setting of theincoming CO line call as follows:a) DIL/TIE: the setting of each CO line port (→ 1.4.6 DIL (Direct In Line), 1.13.13 PRIVATENETWORK FEATURES)2.17.2 [10-2] DIL Table & Port Settings—DIL→ Tenant Number→ VM Trunk Group No.b) DID: the setting of each location number for DID (→ 1.4.5 DID (Direct Inward Dialing))2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)→ Tenant Number→ VM Trunk Group No.[Example]For DIL Calls:Each location number can have its VM trunk group number (message number) and tenant number.Explanation:A CO line call handled by DIL distribution reaches a VM (DPT) group directly or by the Intercept Routingfeature. According to the [DIL Programming Example] and [VPS Programming—Programming[DIL Programming Example][VPS Programming—Programming Example of Trunk Group Assignment]12345678:DayLunchBreakNightDayLunchBreakNight:12Trunk Group No. Company Greeting No. Incoming Call ServiceCustom Service 11Custom Service 29Custom Service 31Custom Service 12Custom Service 21Custom Service 15Custom Service 42Custom Service 30::· ·· ·· ·· ·· ·· ·· ·· ·· ·· ·Port No.(CO Line No.)0102Day105102Lunch100100Night100100Break105102DIL Destination VM TrunkGroup No. Tenant No.1212:::::: :
