1.19 VFeature Manual 321Conditions[General]• It is possible to call an extension (extension port) in a VM group directly. If the calls are routed directlyto the extension in the group, it is possible to enable some features (e.g., FWD, Idle Extension Hunting)on the extension in the group.The Voice Mail DTMF/DPT (Digital) Integration (e.g., command transmit) is also available on theextension.• One-touch Voice Mail Feature AccessIt is possible to assign a One-touch Dialing button for direct access to a Voice Mail feature. (→ 1.12.4One-touch Dialing) For example, to access a mailbox (mailbox number 123) of the VPS (extensionnumber 165) directly, assign "165#6123" to a One-touch Dialing button. When pressing this button, theoutgoing message (OGM) of the mailbox will be heard.[KX-TDA50]• All ports in a VM (DPT) group must be connected to either the same DLC card, or to the pre-installedSuper Hybrid ports.[KX-TDA100/KX-TDA200/KX-TDA600]• All ports in a VM (DPT) group must be connected to a single DHLC or DLC card.Programming ReferencesPC Programming Manual2.8.5 [1-1] Slot—Port Property - Extension Port→ DPT Type—Type→ DPT Type—VM Unit No.→ DPT Type—VM Port No.2.10.18 [3-7-1] VM(DPT) Group—System Settings2.10.19 [3-7-2] VM(DPT) Group—Unit Settings2.10.21 [3-8-1] VM(DTMF) Group—System Settings2.10.22 [3-8-2] VM(DTMF) Group—Group SettingsPT Programming Manual[601] Terminal Device Assignment[660] VM Group Floating Extension NumberFeature Manual References1.19.4 Voice Mail DPT (Digital) Integration1.19.5 Voice Mail DTMF Integration2.1 Capacity of System Resources
