1.9 IFeature Manual 141Programming ReferencesPC Programming Manual2.9.8 [2-6-1] Numbering Plan—Main—Features→ Log-in / Log-out→ Not Ready (Manual Wrap-up) Mode On / Off2.10.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Miscellaneous→ No. of Unanswered Calls for Automatic Log-out→ Last Extension Log-out2.10.15 [3-5-3] Incoming Call Distribution Group—Miscellaneous—Options—Wrap-up Timer based on2.10.13 [3-5-1] Incoming Call Distribution Group—Member List—Wrap-up Timer2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 8—Wrap-up Timer2.11.5 [4-1-4] Wired Extension—Flexible Button→ Type→ Parameter Selection (for Log-in/Log-out)→ Ext. No. / Floating Ext. No. (for Log-in/Log-out)2.11.10 [4-2-1] Portable Station—Extension Settings—Option 8—Wrap-up Timer2.11.13 [4-2-3] Portable Station—Flexible Button→ Type→ Parameter Selection (for Log-in/Log-out)→ Ext. No. / Floating Ext. No. (for Log-in/Log-out)2.11.17 [4-3] DSS Console→ Type→ Parameter Selection (for Log-in/Log-out)→ Ext. No. / Floating Ext. No. (for Log-in/Log-out)2.18.1 [11-1] Main—SMDR—Print Information—Log-in / Log-outPT Programming ManualNoneFeature Manual References1.6.3 Flexible ButtonsOperating Manual References1.3.38 ICD Group Features—Log-in/Log-out1.9.4 ICD Group Features—Outside DestinationsDescriptionUp to 4 outside parties or destinations at another PBX can be assigned as members of an Incoming CallDistribution (ICD) Group, using the following method: A virtual PS is registered as a member of the ICDGroup. Then, the telephone number of the outside destination is specified as the FWD—All Callsdestination. Calls to the ICD Group will also ring at the outside destination as if that destination were anextension within the PBX.This is useful in situations such as the following:
