1.9 I140 Feature Manual• If an ICD Group button is assigned, it also shows the log-in/log-out status of the corresponding group.The light pattern is the same as the Log-in/Log-out button that includes the group number.• Wrap-up Timer– Two wrap-up timers can be programmed, an ICD Group member wrap-up timer and an extensionwrap-up timer. System programming selects which timer is used. When the ICD Group memberwrap-up timer is selected, the timer is only activated after calls to the extension through an ICDGroup. When the extension wrap-up timer is selected, the timer is activated after all calls to or fromthe extension, including a retrieved call on hold.– Only calls from ICD Groups cannot be received during the wrap-up time. Other calls are receivedas normal.– The wrap-up timer does not work for PS Ring Groups.• Wrap-up ButtonA flexible button can be customized as the Wrap-up button. It shows the current status as follows:• When a PS in Wireless XDP Parallel Mode completes a call, neither the PS nor its wired telephone canhave Wrap-up time. (→ 1.20.4 Wireless XDP Parallel Mode)• Automatic Log-outA member extension may be logged out automatically, if the Unanswered time expires apreprogrammed number of times consecutively. The number of consecutive unanswered calls can beassigned for each incoming call distribution group. If the extension is a member of more than oneincoming call distribution group, the unanswered number is counted across all corresponding incomingcall distribution groups. It is possible to return to log-in mode manually.The Automatic Log-out feature does not work for extensions in an incoming call distribution group usingthe Ring distribution method (→ 1.9.2 ICD Group Features—Group Call Distribution).• Log-in/Log-out MonitorThe supervisor extension can monitor and control the log-in/log-out status of the incoming calldistribution group members. (→ 1.9.7 ICD Group Features—Supervisory)• Log-in/Log-out Information on SMDRLog-in/Log-out information can be printed out on SMDR. (→ 1.16.1 SMDR (Station Message DetailRecording))Parameter Usage Light PatternRed on OffNo parameter Used with an ICD Group button, or withthe floating extension number of anincoming call distribution group, or with(All).— —Floating extension number of aspecified incoming calldistribution groupUsed to log in to or out of the specifiedincoming call distribution group.Log-outStatusLog-in Status(All) Used to log in to or out of all incomingcall distribution groups to which theextension user belongs.After Log-outOperationAfter Log-inOperationLight pattern StatusSlow red flashing Wrap-upRed on Not ReadyOff Ready (Wrap-up mode cancel)
