13.1.10 PredialingDescriptionA display proprietary telephone (PT) user can check and correct the number to be dialed on-hook. The call willbe initiated after going off-hook.Conditions• Storing the Predialed Number in Personal Speed DialingThe predialed number can be stored in Personal Speed Dialing by pressing the AUTO DIAL/STORE button(® 16.1.3 Speed Dialing, Personal). In this case, the extension will enter personal programming modeautomatically so that a name can be assigned to the stored number.Operating Manual References3.1.2 Personal Programming13.1.11 Printing MessageDescriptionAn extension user can select a message to be output on SMDR. Up to eight messages can be preprogrammedin the Printing Message table, and are available to all extensions connected to the PBX. A message can containthe "%" symbol, which requires a number to be entered in its place when the message is selected at anextension.Depending on the content of the preprogrammed messages, this feature can be used to record a variety ofinformation, which can be output on SMDR to, for example, a connected PC.[Example]If message 1 is preprogrammed as "Started work", and message 2 as "Finished work", employees can sign inby selecting message 1 when starting work, and sign out by selecting message 2 when finishing. A connectedPC can then be used to generate employee work records.Conditions• Up to seven "%"s can be stored for each message.PC Programming Manual References4.8 [2-6-1] Numbering Plan—Main—Features— Printing Message8.2 [6-2] Hotel—Main— SMDR for External Hotel Application 2—Printing Message 1–8Feature Manual References16.1.1 SMDR (Station Message Detail Recording)21.1 Capacity of System ResourcesOperating Manual References1.3.50 Printing Message220 Feature Manual Document Version 2008-1113.1.11 Printing Message
