1.13 PFeature Manual 255[Example]The leading numbers of extensions accessed through the VoIP network are added as entries to the QuickDialing table, in addition to being registered as Other PBX Extension Numbers, as shown below:[Programming Example]Number to dial to call an extension at another PBX using VoIP network:7 (TIE line access number) + 20 (PBX Code) + 1011 (extension number)Number to dial to call that extension using a public CO line:9 (CO line access number) + 1-333-123-1011If the call cannot be completed using the VoIP network, and the dialed leading number is found in the QuickDialing Table, the call will be automatically rerouted to a CO line and as specified by the correspondingdestination number.When a call is made using the VoIP network, if the PBX does not receive a reply from the other PBX withinabout 4 seconds of making the call, or an error is returned, the call is rerouted to a public CO line asspecified.Conditions• Some QSIG services are available. (→ 1.13.18 PRIVATE NETWORK FEATURES—QSIG)• Toll Restriction (TRS) settings apply to calls rerouted to public CO lines.Programming ReferencesPC Programming Manual2.8.9 [2-6-2] Numbering Plan—Quick Dial—Use quick dial for rerouting to public CO when TIE line does notwork (MPR Software File Version 3.2000 or later)PT Programming ManualNoneFeature Manual References1.13.13 PRIVATE NETWORK FEATURES[Quick Dialing Table]Quick Dialing No. Destination No.720 91333123PBX-1 PBX-2Extn.1000 Extn.1011(333-123-1011)IP-GW IP-GWDials"7-20-1011".Private IPNetworkTelephone Company(area code: 222)Telephone Company(area code: 333)PBX code: 20PBX code: 301-333-123-1011
