1.1 AFeature Manual 236. ARS OptionsAuthorization Code for TenantA Carrier Authorization Code can be assigned to each tenant.→ 2.14.6 [8-5] Carrier—Authorization Code for TenantAuthorization Code for Trunk GroupA Carrier Authorization Code can be assigned to each trunk group.→ 2.14.8 [8-7] Authorization Code for TRGItemized Billing CodeAn Itemized Billing Code can be assigned for each extension and for each verification code.If a call is not made from an extension, such as via Direct Inward System Access (DISA) or TIE line,and no verification code is used, the Itemized Billing Code assigned to location 1 in the VerificationCode Table will be used.→ 2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 2—ARS Itemized Code→ 2.10.10 [4-2-1] Portable Station—Extension Settings—Option 2—ARS Itemized Code→ 2.12.3 [6-3] Verification Code—Itemized Billing Code for ARSConditionsWARNINGThe software contained in the ARS feature to allow user access to the network must be upgraded torecognize newly established network area codes and exchange codes as they are placed intoservice.Failure to upgrade the premises PBXs or peripheral equipment to recognize the new codes as theyare established will restrict the customer and the customer's employees from gaining access to thenetwork and to these codes.KEEP THE SOFTWARE UP-TO-DATE WITH THE LATEST DATA.• Logging Outgoing Calls by SMDRWhether SMDR logs the user-dialed number or the ARS-modified number is determined throughsystem programming. (→ 1.16.1 SMDR (Station Message Detail Recording))→ 2.17.1 [11-1] Main—SMDR—Option—ARS Dial• ARS Data Import/ExportARS tables and data can be copied to and from the PBX and a PC using the KX-TDA MaintenanceConsole software. Files are saved in CSV (Comma Separated Value) format. Because of the largeamounts of programming that may be necessary to use ARS effectively, you may choose to export ARStables and data to a PC, edit them using the software of your choosing, then import the new data to thePBX. This is particularly convenient if you need to update your ARS tables for new area codes ortelephone rates, or when you'd like to copy ARS tables from one PBX to another.→ 2.4.4 Tool—Import→ 2.4.5 Tool—Export• TRSToll Restriction (TRS) checks are performed before ARS number modification, so program TRS DeniedCode Tables and Exception Code Tables accordingly. (→ 1.17.6 TRS (Toll Restriction))• When ARS Routing Takes PlaceARS routing takes place after the preprogrammed number of digits (leading number + additionalnumber of digits) have been dialed.Programming ReferencesPC Programming Manual
