Panasonic KX-TDA0484 Programming Manual

Also see for KX-TDA0484: Getting started Programming guide

Contents

Panasonic KX-TDA0484 Programming Manual Manual pdf 59 page image

3.3 Data ManagementProgramming Guide 59Firmware Status shows the current firmware status of page 0 and page 1, and StartupPage shows the current active page on startup. For details about these parameters, refer to"3.3.2 Handling of Firmware Page".3. Do the following to update the desired page with the uploaded firmware data:a. Click the option for the page whose current firmware status is not "Main Operation Mode"for Select Page.b. Click OK.You will see a confirmation screen.c. Click OK.4. Do one of the following:• Click REBOOT to start up the VoIP Gateway Card with the updated page and confirm thatthe upload operation has been carried out successfully.You will see a reboot confirmation screen. Refer to "3.4.1 Reboot" and finish the reboot.NoteAfter the reboot, the card starts up with the updated page temporarily so that you canconfirm the result of the upload operation. If you reboot again, the card does not startup with the updated page, but starts up with the page whose current firmware status is"Main Operation Mode".• Click CANCEL to return to the main menu without starting up the card with the updatedpage.